Cordless Portable Angle Grinder Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13015
Jlab Export is a leading Cordless Portable Angle Grinder Manufacturer,and suppliers in India
Battery power frees this angle grinder from the mains for cutting and grinding out in the yard, on a gate or under a vehicle. It takes 125 mm discs on an M14 spindle, runs at 8500 rpm with no load and cuts 33 mm deep. An 18 V, 5 Ah Li-ion battery drives it, and one spare battery is supplied.
Specifications
| Battery voltage | 18 V |
| Battery | 5 Ah Li-ion, rechargeable, one spare supplied |
| No-load speed | 8500 rpm |
| Disc diameter | 125 mm |
| Spindle thread | M14 |
| Maximum cutting depth | 33 mm |
| Switch | Slide |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Site Work Practicals for Fabrication Students
On a fencing or railing job, students cut lengths of Angle Iron where the frame is being put up, with no extension lead across the site. The pieces are tacked with the Portable Arc Welding Machine and the tacks are ground smooth with the same grinder.
Maintenance trainees use it to cut off a seized bolt on a vehicle chassis and to clean rust from a bracket before repainting. Teachers make battery care part of the lesson: charge, swap and store the packs the right way.
Frequently Asked Questions
How long does a 5 Ah battery last?
It depends on the job. Cutting thick steel drains a battery much faster than light grinding or rust removal. Keeping the spare battery charged lets work go on while the first one is recharged.
Why is the speed lower than on many corded grinders?
Battery grinders often run slower than mains models of the same disc size. At 8500 rpm, fit discs rated for at least that speed and let the disc cut without forcing it, which also saves charge.
What does the slide switch do?
It turns the grinder on and off from the body of the tool. A slide switch stays where it is put, so switch off and wait for the disc to stop before putting the grinder down.
Can it use the same discs as a corded 125 mm grinder?
Yes, if the disc is 125 mm, fits the M14 spindle flange and is rated for 8500 rpm or more. Discs made for corded 125 mm grinders carry higher speed ratings, so they meet that rule.
How should Li-ion batteries be stored?
In a cool, dry place, part charged if they will sit unused for weeks, and away from metal swarf that could short the terminals. Do not leave them in a hot vehicle or in direct sun.
Other Angle Grinders
- Portable Angle Grinder (corded mains model)
- Large Angle Grinder
- Angle Grinder
- Hand Grinder
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
