Angle Iron Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13085
Jlab Export is a leading Angle Iron Manufacturer,and suppliers in India
Angle iron is a length of metal rolled into an L-shaped section. Each leg of this one is 40 mm wide and 3 mm thick, and it comes in 3 m lengths. In school and ITI workshops it is the usual stock for stands, frames, brackets and bench supports.
Specifications
| Section | Equal angle, 40 x 40 mm |
| Thickness | 3 mm |
| Length | 3 m |
| Material | Iron |
| Colour | Silver |
| Minimum order quantity | 50 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice: Marking and Cutting Frames
A square frame with mitred corners is a standard fitting-shop exercise. Students measure each piece with a Steel Rule and scribe the cutting lines on both legs with a Scriber. They saw along the lines with the Hacksaw, with the angle held in the Bench Vice.
The cut ends are filed back to the lines with the Engineers Flat Files. Before the corners are joined, each one is checked with an Engineers Square, and students learn how a small error at one corner grows across the frame.
Frequently Asked Questions
What do 40 x 40 mm and 3 mm mean?
Both legs of the L are 40 mm wide, measured across the outside, and the metal is 3 mm thick. An angle with two equal legs like this one is called an equal angle.
How do I cut a clean mitre in angle iron?
Mark the line on both legs and clamp the angle close to the cut so it does not chatter. Saw just outside the line, then file back to it and test the joint against a square before fixing.
Can angle iron be welded or bolted?
Yes. Frames are usually arc welded at the corners or bolted through drilled holes. Clean off scale and oil at the joint first, and prime the finished frame with Anti-Rust Paint, since bare iron rusts.
Is it sold in full lengths?
Yes, it comes in 3 m lengths. Workshops cut it to size for each job, so one length gives several frame pieces for student exercises.
Other Workshop Stock and Tools
- Large Angle Grinder (230 mm disc capacity)
- Galvanized Steel Sheet
- Drill Press
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
