Galvanized Steel Sheet Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13084
Jlab Export is a leading Galvanized Steel Sheet Manufacturer,and suppliers in India
Galvanized steel sheet is steel with a coat of zinc on its surface. The zinc keeps rust away, so the sheet suits trays, ducts, bins and covers that will see damp. This flat sheet is 1 mm thick, silver in colour and comes in a standard sheet size.
Specifications
| Material | Steel, galvanized |
| Thickness | 1 mm |
| Form | Flat sheet |
| Size | Standard sheet |
| Colour | Silver |
| Minimum order quantity | 50 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Exercises in Sheet Metal
Students in sheet-metal and fitting shops make a dustpan, a tool tray or a simple box from this sheet. They mark out with a Single Ended Scriber and a Steel Rule. Then they cut the blank with the Aviation Snips and fold the raw edges over into a safe hem.
The seams can then be soft soldered with Tin Lead Solder and the copper Soldering Iron, after an active flux is brushed onto the zinc. Welding or strongly heating galvanized steel gives off zinc fumes, so that work belongs under fume extraction.
Frequently Asked Questions
What does galvanized mean?
The steel has been coated with zinc. Zinc corrodes far more slowly than bare steel and also protects it at small scratches, so galvanized sheet lasts longer in damp places than plain steel sheet.
Can 1 mm galvanized sheet be cut with hand snips?
Yes. Aviation snips and tin snips handle sheet of this thickness, with straight blades for lines and offset blades for curves. Long straight cuts are easier with a fine-tooth hacksaw blade and the sheet clamped between boards.
Can galvanized sheet be painted?
Yes, but new zinc gives poor paint grip. Clean off oil and dirt, lightly roughen the surface and use a primer made for galvanized metal before the top coat.
How does it differ from aluminium sheet?
Steel is about three times as heavy as aluminium, stiffer and magnetic, and it holds a fold or seam with less denting. The 0.8 mm Aluminium Sheet is lighter and easier to cut but does not take soft solder.
Other Sheet Metal Tools
- Straight Metal Tin Snips
- Mallet Hammer
- Hammer (Ball Peen, Cross Peen, Straight Peen, Setting) Set
- Rivet Set
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
