Large Angle Grinder Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-9279
Jlab Export is a leading Large Angle Grinder Manufacturer,and suppliers in India
This large angle grinder takes discs up to 230 mm and runs on a 2400 W motor, for heavy grinding and cutting of steel sections and welded joints. Starting current limitation lets the motor run up gently when it is switched on. The rear grip rotates, the side handle fits in three positions on the housing, and the switch has a safety interlock.
Specifications
| Power | 2400 W |
| Disc capacity | 230 mm |
| Starting | Starting current limitation |
| Switch | With safety interlock |
| Rear grip | Rotating, adjustable |
| Side handle | Fits in three positions on the housing |
| Supplied with | Swivel handle and quick lock |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Fabrication Workshop Practice
After students weld a butt joint with an Electrode, they grind the bead down flush and dress the edges of the joint. With a cutting disc fitted, they cut Angle Iron to length for a welded frame, with the work clamped in a Bench Vice.
Students wear Grinding Goggles for every job and clean the ground surface with a Wire Brush before painting. Teachers use it to explain how grinding and cutting discs differ. They also show why a disc must never be larger than the 230 mm the grinder takes.
Frequently Asked Questions
What size discs does it take?
It takes discs up to 230 mm in diameter, the usual size for large grinders. Never fit a larger disc. Smaller 125 mm discs, such as the Grinding Disk and Cutting Disk, are sized for the Portable Angle Grinder.
What does starting current limitation do?
It limits the current the motor draws at the moment it is switched on. The grinder runs up to speed gradually instead of with a sudden jerk, which makes it easier to hold and puts less load on the supply.
Can the handles be set for left- or right-handed work?
Yes. The side handle fits in three positions on the housing, and the rear grip rotates to the position that suits the job. A swivel handle comes with the grinder.
What is the difference between grinding and cutting discs?
A cutting disc is thin and cuts with its edge, for slitting bars, sections and sheet. A grinding disc is thicker and is held at a shallow angle so its face removes metal and smooths welds. Never grind with the face of a cutting disc.
What power supply does it need?
The motor is rated at 2400 W, so it needs a socket and circuit that can carry that load. If an extension lead is used, unroll it fully and choose a cable rated for the current.
Other Grinders for the Workshop
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
