Anti-Rust Paint Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13089
Jlab Export is a leading Anti-Rust Paint Manufacturer,and suppliers in India
Anti-rust paint is the first coat put on bare iron and steel. It goes on under the colour coat and slows rusting where air and moisture reach the metal. In school and ITI workshops it is used on angle iron frames, stands, brackets and other steel jobs before they are finished.
Specifications
| Type | Anti-rust paint |
| Coat | Primary (first) coat |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Rusting Experiments and Workshop Practice
A classic school experiment on rusting compares iron samples kept in moist air. Students paint some iron nails with the primer and leave others bare. They stand both sets in test tubes with damp cotton wool for a week and then compare the rust. The Rust Race Lab Investigation takes the idea further by testing rust inhibitors.
In the fitting shop, students prime the frames they make from Angle Iron. They clean off scale and loose rust with the Wire Brush Set in a drill and wipe away dust and oil. Then they brush on the primer and, once it is dry, a top coat from our Paints.
Frequently Asked Questions
Is this a primer or a finishing paint?
It is a primary coat, the first layer on bare metal. Once it has dried, the job is finished with a top coat in the colour needed, for example red, blue, green, black or white.
How should the metal be prepared before priming?
Remove loose rust, mill scale and flaking old paint with a wire brush or abrasive, then wipe the surface free of dust, oil and grease. Paint only when the metal is dry, because primer laid over damp or oily steel lifts off.
Can it be brushed over rust?
Firm, tight rust left after wire brushing can be primed, but loose and flaking rust must come off first. Paint over loose rust breaks away with it, and the steel underneath goes on rusting.
How many coats should be applied?
One even coat usually covers clean steel, with a second coat on edges, corners and welds where the film is thin. Let each coat dry as directed on the container before the next one goes on.
Other Items for Painting Metal
- Sand Paper Sheets (for rust removal and metal sanding)
- Electric Airless Paint Sprayer Gun
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
