Spray Gun Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-9343
Jlab Export is a leading Spray Gun Manufacturer,and suppliers in India
This hand spray gun atomises paint from a refillable plastic cup, and its adjustable fan gives a wide or narrow spray pattern for large or small areas. It is offered with a 1.0 mm mini nozzle or with a 1.8 mm, 2.0 mm or 2.5 mm nozzle. Besides paint, it can spray water-based and solvent-based adhesives.
Spray Gun Details
| Type | Hand spray gun with refillable plastic cup |
| Spray pattern | Adjustable fan, for large or small areas |
| Nozzle sizes offered | 1.0 mm (mini), 1.8 mm, 2.0 mm, 2.5 mm |
| Sprays | Paint, water-based and solvent-based adhesives |
| Balance | Well balanced in the hand |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Spray Gun
The first lesson is the pattern test. With the gun on the air line from an Air Compressor, students spray a single burst at a sheet of paper taped up inside the Spray Booth System. They open and close the fan control and look for an even oval with no heavy centre and no split ends.
Next they coat steel offcuts, first with Anti-Rust Paint through a larger nozzle and then with a top colour from the Paints range through a smaller one. The class compares film build and finish between the two nozzles. Each session ends with stripping and cleaning the gun, a habit the instructor checks every time.
Frequently Asked Questions
Which nozzle size should I order?
Match the nozzle to the material and the job. The 1.0 mm mini nozzle suits small parts and touch-up work with thin paint. The 1.8 mm and 2.0 mm nozzles cover general painting, and the 2.5 mm nozzle passes thicker material such as primer or adhesive.
How is the spray fan adjusted?
The fan control sets the width of the pattern. Open it for a wide oval when coating a large panel, and close it down for a narrow pattern on edges, corners and small parts. Test the setting on scrap before spraying the work.
How should paint be prepared before it goes into the cup?
Stir it well and thin it as its maker recommends for spraying. Pour it into the plastic cup through a strainer so lumps and skin cannot block the nozzle, then fit the lid firmly before connecting the air.
How do I clean the gun after use?
Empty the cup and pour in a little of the matching cleaner: water for water-based paint or adhesive, thinner for solvent-based material. Spray it through until it runs clear, then wipe the nozzle. Never leave adhesive to dry inside the gun.
Other Painting and Finishing Tools
- Electric Airless Paint Sprayer Gun (electric, airless type)
- Sanding Block (cork)
- Wire Brush
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
