Pressure Washer Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13027
Jlab Export is a leading Pressure Washer Manufacturer,and suppliers in India
A pressure washer drives water out through a narrow nozzle at high pressure to strip mud, grease and grime from vehicles, floors and machine bases. This one has a 1500 W brushless induction motor and works at 80–100 bar with a flow of 6.5 L/min. An 8 m outlet hose and a 3 m power cable give it reach around a car.
Specifications
| Motor | 1500 W brushless induction motor |
| Flow rate | 6.5 L/min |
| Operating pressure | 80–100 bar |
| Outlet hose | 8 m |
| Nozzle | Short, adjustable |
| Power cable | 3 m |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Pressure Washer
Motor vehicle trainees wash the underbody and wheel arches of a car before it goes up for service. They set the adjustable nozzle to a wide spray, keep it moving and work from the top down. The standing water on the bay floor is then drawn up with the Vacuum Cleaner, and the Blower Fans unit dries what is left.
For a flow check, students time how long the washer takes to fill a container of known volume and work out the litres per minute. RAC trainees can set it beside the Integrated Coil Cleaning Machine. A jet at this pressure flattens the thin aluminium fins of an AC coil, so coils go to the low-pressure machine. Any fins already bent are combed straight with the Fin Comb.
Frequently Asked Questions
Which matters more, pressure or flow rate?
Both do different jobs. Pressure, here 80–100 bar, breaks dirt loose from the surface. Flow, here 6.5 L/min, carries the loosened dirt away.
What water supply does it need?
The tap or tank feeding the washer must give at least 6.5 L/min, or the pump will run short of water. Use clean water, because sand or grit drawn into the pump wears its seals and valves. Never run the motor with the water supply turned off.
What does a brushless induction motor mean here?
An induction motor has no carbon brushes, so there are no brushes to wear down or replace. Many smaller washers use brushed universal motors instead, and their brushes have to be changed from time to time.
Can it be used near electrical equipment or on AC coils?
Keep the jet well away from sockets, motors, control panels and wiring. Condenser and evaporator coils need a low-pressure coil cleaner, because a high-pressure jet bends the fins and blocks the airflow through the coil.
How far can it reach from where it stands?
The 8 m outlet hose lets the operator walk right around a car while the machine stays in one place. The 3 m power cable sets how far the machine can sit from the socket, so keep the plug clear of standing water.
Other Washing, Blowing and Cleaning Tools
- Air Compressor (mobile, with a washing gun)
- Hand Blower
- Wire Brush
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026