Screwdriver Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-12954
Jlab Export is a leading Screwdriver Manufacturer,and suppliers in India
Some small slotted screws sit where a straight driver cannot be lined up, such as behind a bracket or deep in a cramped panel. This angled flat screwdriver reaches them. It is made of chrome vanadium steel, and its 2 x 75 mm size suits small terminal and instrument screws.
Specifications
| Tip type | Flat (slotted) |
| Form | Angled |
| Material | Chrome vanadium steel |
| Size | 2 x 75 mm |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Panel and Instrument Practice for Students
Electronics and instrument mechanic trainees meet small slotted screws in terminal strips, relay bases and instrument cases. When wiring a control panel, they form neat wire ends with the Needle Nose Pliers. They clamp them under terminals close behind the panel frame, where the angled tip can still turn them.
After each connection, with the supply off, they check continuity with the Digital Multimeter. A further exercise is stripping and rebuilding a small instrument, keeping the removed screws in order so each goes back in its own hole.
Frequently Asked Questions
What is an angled screwdriver used for?
It drives screws that a straight screwdriver cannot line up with, because something blocks the space behind the screw. The angled form brings the tip onto the screw while the handle stays clear of the obstruction. Turn it in short strokes and re-seat the tip each time.
Which screws does a 2 x 75 mm flat tip fit?
The small tip suits slotted screws in terminal blocks, relay bases, small switches and instrument cases. Larger slots need a wider blade, because a narrow tip in a wide slot twists out and damages the head.
Why is it made of chrome vanadium steel?
Chrome vanadium steel is an alloy steel used for many hand tools, because it hardens and tempers well. On a tip this small, use steady pressure and never use the blade as a lever.
How do I stop the tip slipping out of small screws?
Seat the tip fully in the slot and press in as you turn, keeping the blade square to the screw. Clean paint or dirt out of the slot first. If the tip still slips, the screw needs a different blade size.
Other Flat-Tip and Cross-Tip Drivers
- Screwdriver (insulated, magnetic flat tip, six sizes)
- Screwdriver (angled cross-head type)
- Screw Driver Flat (long flat blade in silicon-manganese steel)
- Screwdrivers (set of four in chrome vanadium steel)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
