Screwdrivers Manufacturer,Supplier and Exporter in India
Product Code : EL-CLE-9087
Jlab Export is a leading Screwdrivers Manufacturer,and suppliers in India
A set of four screwdrivers covers the small and large screws met at a fitting bench. The blades are chrome vanadium steel and the handles are hammer proof plastic. The sizes run from 3 x 70 mm, 140 mm long overall, up to 8 x 170 mm at 320 mm long.
Specifications
| Pieces | 4 |
| Blade material | Chrome vanadium steel |
| Handles | Hammer proof plastic |
| Approx. sizes | 3 x 70, 4 x 90, 6 x 130 and 8 x 170 mm |
| Overall lengths | 140, 160, 220 and 320 mm |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Screwdriver Set
In an ITI fitting course, trainees drill and tap holes in a plate with the Tap & Die Set, Metric Small. They then fix a cover plate to it with machine screws. Choosing the right driver for each screw head is part of the job.
Electrical students use the smaller drivers on terminal screws when wiring a switch board, and the larger ones to fix the board to its frame. At the end of a session, the set goes back in the Tool Box so a missing piece is noticed at once.
Frequently Asked Questions
How do I pick the right screwdriver for a screw?
Use the driver whose tip fills the screw head. A tip that is too small twists out and burrs the head. One that is too wide scrapes the surface around the screw. Press in firmly and keep the shaft in line with the screw.
What do the figures in each size mean?
The first figure is the size of the tip and the second is the blade length, both in millimetres. The overall length adds the handle, from 140 mm for the 3 x 70 driver to 320 mm for the 8 x 170.
How do I stop a screwdriver from slipping?
Clean the screw head first, choose the size that fills it, and push in firmly while turning. Hold the work in a vice rather than in your hand, so a slip does not run the blade into your fingers.
How should the set be stored?
Keep the four drivers together in a rack or tool box with the blades clean and dry. Do not use a screwdriver as a lever or a chisel, because that bends the blade and spoils the tip.
Other Screwdrivers and Driver Bits
- Screwdriver (flat, magnetic and fully insulated)
- Screwdriver (cross-head, magnetic, cushion grip)
- Drill Bit Set (drill and screwdriver bits)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
