Vacuum Cleaner Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13023
Jlab Export is a leading Vacuum Cleaner Manufacturer,and suppliers in India
This wet and dry vacuum cleaner picks up spilt water as well as dust, sawdust and swarf, and collects it all in a 20 L stainless steel tank. Its 1250 W motor runs on 230 V single phase and pulls up to 13 kPa of vacuum. A 1.5 m flexible hose with a hand grip and air control, and a 3.5 m cable, are fitted.
Specifications
| Type | Wet and dry |
| Tank | Stainless steel, 20 L |
| Supply | 230 V, single phase, 50 Hz |
| Power | 1250 W |
| Cable | 3.5 m |
| Hose | 1.5 m, flexible, with hand grip and air control |
| Maximum vacuum | 13 kPa (130 mbar) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with the Vacuum Cleaner
After a drilling exercise on the Electric Drill (Bench Drill), trainees vacuum the chips off the table and out of the T-slots. Brushing them onto the floor only moves the mess. Clearing the machine this way at the end of every practical is a good housekeeping habit to teach from the first week.
For wet pickup, the class washes a floor or a wash bay with the Pressure Washer and draws up the standing water with the vacuum. The Blower Fans unit then dries what is left. Teachers can open the air control on the grip to show how a bleed vent lowers the suction at the nozzle.
Frequently Asked Questions
Can it pick up both water and dust?
Yes, it is a wet and dry machine with a 20 L stainless steel tank. When picking up water, empty the tank before it fills right up. Let the tank and filter dry out before vacuuming dust again, so the dust does not cake.
What does 13 kPa (130 mbar) of vacuum mean?
It is how far the motor can pull the pressure below room pressure with the hose sealed. A higher figure lifts heavier debris and water up the hose. Airflow decides how quickly loose dust is drawn in.
What is the air control on the hand grip for?
It is a small vent that lets outside air into the hose. Opening it lowers the suction at the nozzle, so the hose does not grab cloth, papers or small parts. Close it for full suction on floors and in corners.
Why does it have a stainless steel tank?
Stainless steel does not rust after wet pickup and rinses out cleanly. Empty it, rinse it and leave it open to dry after each wet job.
How far can it reach from a socket?
The 3.5 m cable and the 1.5 m hose give about 5 m of reach. For a bigger room, plug it into the Extension Cable rather than dragging the machine by its hose.
Other Cleaning Equipment for the Workshop
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
