Cordless Rotary Hammer Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-13020
Jlab Export is a leading Cordless Rotary Hammer Manufacturer,and suppliers in India
Running on an 18 V lithium-ion battery, this SDS-plus rotary hammer takes masonry drilling to places with no socket nearby. It strikes with 5 J, drills up to 32 mm in concrete and has vibration figures for both drilling and chiselling. A replacement 5 Ah battery and a carry case come with it.
Specifications
| Power source | 18 V Li-ion battery, 5 Ah, rechargeable |
| Replacement battery | 1 pc |
| Impact energy | 5 J |
| Hammer rate | 0–4600 bpm |
| No-load speed | 0–800 rpm |
| Chuck | SDS-plus |
| Maximum drilling diameter | Concrete 32 mm, steel 13 mm, wood 30 mm |
| Vibration, drilling | 6.9 m/s² |
| Vibration, chiselling | 7.4 m/s² |
| Case | Included |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Practicals Away from a Power Point
In a new building with no wiring yet, construction trainees can drill a ceiling or wall for fixings without trailing leads. They mark the positions with the Tape Measure, drill each hole with an SDS-plus masonry bit and set an Anchor Bolt in it.
With an SDS-plus flat chisel in place of the bit, trainees can cut a short chase in brick for a conduit. They then cut a second chase by hand with one of the Club Hammers and a Flat Cold Chisel. Comparing the two shows the time saved, and why a hand chisel must always be struck square.
Frequently Asked Questions
What do the vibration figures tell me?
They are hand-arm vibration values, 6.9 m/s² when drilling and 7.4 m/s² when chiselling. The higher the figure, the less time one person should spend on the tool in a day. Teachers can use them to plan short turns for each trainee.
What does the second battery give me?
Masonry drilling uses a lot of charge, so a spare 5 Ah pack means one can be charging while the other is in the tool. Both are rechargeable lithium-ion packs for this 18 V hammer.
Why do the speed and hammer rate start from 0?
Both follow the trigger, up to 800 rpm and 4600 blows a minute. A light squeeze turns the bit slowly so it does not wander on hard concrete. Full pressure gives top speed once the hole has started.
Can it drill wood and steel?
Yes, up to 30 mm in wood and 13 mm in steel, using bits made for those materials and rotation without hammer blows. Keep the hammer action for concrete, brick and stone.
How is it different from the Rotary Hammer Drill?
Both have SDS-plus chucks and bore about the same size of hole in concrete. This model runs on an 18 V battery and has vibration figures for chiselling as well as drilling. The Rotary Hammer Drill plugs into the mains, so it never needs charging.
Other Battery and Masonry Tools
- Rotary Hammer Drill (mains model)
- Cordless Portable Angle Grinder (18 V Li-ion)
- Portable Electric Drill (cordless model)
- Masonry Hole Saw
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
