• +91-85699-09696

Vice Grip Pliers Manufacturer,Supplier and Exporter in India

Vice Grip Pliers

Product Code : EL-CLE-9086
Jlab Export is a leading Vice Grip Pliers Manufacturer,and suppliers in India

This pair of locking pliers works as a small clamp that can be carried to the job. A toggle in the handles holds the jaws shut, and a lever opens them again. It is about 175 mm long, takes work up to 32 mm, and has a forged alloy steel jaw on a pressed steel body.

Specifications

ToolLocking pliers
Overall lengthAbout 175 mm
Capacity32 mm
Jaw materialForged alloy steel
Body materialPressed steel
SurfaceRust resistant finish
ReleaseLock and quick release lever
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Exercises Using the Pliers

Small parts should never be held by hand on a drilling machine. Students can lock a short piece of flat bar in the pliers and use the handles to hold it steady on the table of the Pillar Drill Machine. They can then repeat the job with a Hand Vice, which suits thinner pieces.

In a sheet metal lab, the pliers hold two parts together while the joint is made with the copper Soldering Iron. Neither part moves as the solder sets. Maintenance classes use them to turn a stud, or a nut whose flats have worn round.

Frequently Asked Questions

How are locking pliers different from ordinary pliers?
Ordinary pliers grip only while the hand squeezes them. Locking pliers have a toggle linkage that goes over centre and holds the jaws closed. They can be let go and still keep their hold on the part.

Why will the handles not close fully?
The adjusting screw is set too far in for the thickness of the part. Back it out half a turn and squeeze again. If the handles close with no effort and the part slips, turn the screw in instead.

Can they be used as a clamp when welding or brazing?
Yes. Once locked, the pliers hold two pieces together at the joint and can be left in place. Keep the handles away from the flame or arc, and let the pliers cool before you adjust them.

Will the jaws mark the work?
Forged alloy steel jaws can mark soft metals such as copper, brass and aluminium when they are clamped hard. Use only the grip the job needs, or put a strip of soft sheet between the jaws and a finished face.

Other Holding and Clamping Tools

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 5 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us