Battery Eliminator Manufacturer,Supplier and Exporter in India
Product Code : EL-ELA-5244
Jlab Export is a leading Battery Eliminator Manufacturer,and suppliers in India
Battery Eliminator (code EL-ELA-5244) is a power supply that runs from an electrical source other than a battery and changes it into suitable DC power, so battery-operated devices and experiments can be run without dry cells in school, college and ITI labs. It can also replace obsolete battery designs. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Function | Runs from an electrical source other than a battery and changes it to appropriate DC power |
| Typical use | Running battery-operated devices in place of batteries, including obsolete battery designs |
| Quality check | Each battery eliminator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-ELA-5244 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Battery Eliminators?
| Model | Input (as listed) | Output (as listed) |
|---|---|---|
| This battery eliminator (EL-ELA-5244) | An electrical source other than a battery | DC suited to battery-operated devices; range and current to be confirmed |
| Battery Eliminator (0-12 Volts) | Mains | 0–12 V DC |
| Battery Eliminators | 220 V, 50 Hz | 2–6 V or 2–12 V, 1 to 6 A depending on version; steel cabinet |
| Battery Eliminator 12 Volt | 110–220 V AC selectable, 50–60 Hz | 2–12 V DC in steps of 2 V |
| Power Pack | Not stated | AC and DC: 0–12 V 1 A or 0–15 V 2 A |
Choose this unit when you need DC power in place of batteries and will confirm the output when you order; choose a model with a listed range when an experiment needs a known voltage or current, or the power pack when you also need AC.
What Is the Battery Eliminator Used For?
A battery eliminator stands in for dry cells on the physics bench. It powers Ohm’s law, electromagnet, electrolysis and electric bell circuits in class 10 and class 12 physics practicals and ITI workshops. Unlike a set of cells, it does not run down halfway through a practical.
Before connecting a device, set the output to the battery voltage the device was designed for and match the + and − terminals. Switch off before changing connections and keep the unit dry.
What to Specify When Ordering
- Mains supply — the voltage and frequency in your labs.
- Output — the DC voltage or range and the current your experiments or devices need.
- Quantity — the minimum order is 10 units; add connecting leads if needed.
Frequently Asked Questions
What output voltage and current does this model give?
The listing does not state them, so tell JLab the voltage and current you need and the quotation will confirm the output. JLab also lists eliminators with stated ratings, such as 0–12 V DC, or 2–12 V at up to 6 A.
Can it run equipment that was designed for batteries?
Yes, that is its purpose, including devices whose battery type is obsolete. Set the output to the device’s battery voltage and connect it with the correct polarity.
Who manufactures this battery eliminator?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, builds it at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a physics and electrical lab equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. Battery eliminators are built at JLab’s own works rather than bought from a trader, so schools, colleges, ITIs, dealers and importers deal factory-direct and repeat orders come from the manufacturer. It is registered under CIN U29309HR2017PTC069123 and holds MSME Udyam registration UDYAM-HR-01-0003849 (manufacturing enterprise). JLab exports worldwide, shipping to buyers in every region — Thailand in Southeast Asia, Trinidad and Tobago in Central America and the Caribbean, Madagascar in East Africa, Sierra Leone in West Africa and Kazakhstan in Central Asia, for example. Tender details are on the JLab lab tenders page.
Leads and Apparatus to Use with It
- Connecting Leads — plastic-coated conducting wires with connectors for wiring the circuit.
- Demonstration Bell — an electric bell model listed to work on 3–4 volts DC.
See the Educational Laboratory Apparatus range or the full Laboratory Apparatus range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), your mains voltage, the DC output you need and your delivery location through the contact page.
Last updated: 9 October 2026
