• +91-85699-09696

Condenser Replacement For Domestic Refrigerators Manufacturer,Supplier and Exporter in India

Image Not Found .

Product Code : EL-RACLE-12817
Jlab Export is a leading Condenser Replacement For Domestic Refrigerators Manufacturer,and suppliers in India

When the condenser of a household refrigerator leaks or corrodes, this part takes its place. It is a natural convection condenser, so it works without a fan: hot refrigerant inside the tubes gives up its heat to air rising past the coil. It is finished in black, with a diameter of 4 mm.

Specifications

TypeNatural convection (static, no fan)
ColourBlack
Diameter4 mm
UseReplacement condenser for domestic refrigerators
Minimum order quantity10 units
Dispatch timeUsually 4–6 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice: Replacing a Fridge Condenser

Changing a condenser is a standard job in an ITI refrigeration course. Students first recover the refrigerant, then cut the connecting lines with a Copper Pipe Cutter and join the new condenser into the circuit. A new Filter Drier goes in at the same time, because the old one has been open to the air.

Before charging, they pressure-test the joints with dry nitrogen and evacuate the system with the Small Vacuum Pumps. Teachers can then set the old and new condensers side by side to explain why a static condenser needs free air space behind the cabinet.

Frequently Asked Questions

What is a natural convection condenser?
It is a static condenser with no fan. Hot gas from the compressor condenses inside the tubes and warms the air around the coil. That air rises and cooler air takes its place, so heat keeps flowing away. Most are fitted at the back of the refrigerator.

Why is the condenser black?
A dark matt surface gives off heat by radiation better than a bright one, which helps a condenser that has no fan. Keep the black coating clean and undamaged so it keeps working as intended.

What else should be replaced with the condenser?
Fit a new filter drier whenever the system is opened, because the old one has taken up moisture from the air. Then pressure-test, evacuate and charge with the refrigerant named on the compressor label.

How do I know the condenser needs replacing?
Common signs are a leak found on the condenser tubing, corrosion through the tube wall, or a coil crushed when the refrigerator was moved. A kinked condenser can also cause high head pressure and poor cooling.

Does it need space around it?
Yes. Air must rise freely up the back of the cabinet, so leave a gap between the refrigerator and the wall and keep dust off the coil.

Other Domestic Refrigerator Parts

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 5 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us