Data Acquisitions Solutions Manufacturer,Supplier and Exporter in India
Product Code : EL-TWL-10429
Jlab Export is a leading Data Acquisitions Solutions Manufacturer,and suppliers in India
Data acquisition (DAQ) units read analog and digital signals from a process and can send control signals back to it. In this JLab range every pin is multifunction, so the user decides what each pin does. Field wiring goes to screw terminals, and the units talk to a PC over USB, Ethernet or both.
Specifications
| Signals | Analog and digital, for sensing and control |
| Pins | Multifunction, operation set by the user |
| Connections | Screw terminals |
| PC interface | USB, Ethernet or both, by model |
| Typical use | Process monitoring and control |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Choosing a Unit from the Range
For mixed analog and digital work from one PC, the Data Acquisition Card connects over USB and has analog outputs as well as inputs. The Data Acquisition System with SD card logs to a memory card and shows readings on its own display, so it can run unattended. The Digital Data Acquisition unit handles isolated on/off signals from switches and relays. For many test points, the Data Acquisition / Switch System scans channels through plug-in cards and a built-in meter.
Lab Exercises with DAQ Hardware
A first exercise wires a Temperature Sensor to an analog input and plots room temperature on the PC as a heater warms the bench. Students then set one pin as a digital output that switches a relay when the reading passes a set point. That is the simplest on/off control loop, and it shows what process control means in practice.
A Force Sensor on a second input shows the signal rise and fall as a load is pressed and released. The class can turn that signal into a presence check that sets a digital output whenever an object sits on the pad.
Frequently Asked Questions
What is the difference between analog and digital channels?
An analog input reads a voltage that can take any value in its range, such as the output of a temperature or force sensor. A digital channel sees or sets only two states, on and off, as from a switch, a relay or an indicator lamp.
What does a multifunction pin mean?
The job of the pin is not fixed when the unit is built. The user sets in software how a pin works, for example as an input or an output. One unit can then be rearranged for the next experiment without new hardware.
Should I choose USB or Ethernet?
USB suits a unit that sits next to one PC and needs little setting up. Ethernet lets the unit stay near the process with a network cable back to the control room, and more than one computer on the network can reach it.
How do I wire sensors to the screw terminals?
Strip a short length of each wire, push it fully into the terminal and tighten the screw until the wire cannot be pulled out. Join the sensor ground to the DAQ ground, and use screened cable for long signal runs near motors.
Other Data Logging and Control Trainers
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
