PLC Trainer Manufacturer,Supplier and Exporter in India
Product Code : EL-FOT-10254
Jlab Export is a leading PLC Trainer Manufacturer,and suppliers in India
PLC Trainer (code EL-FOT-10254) is a programmable logic controller trainer built around a 32-bit CPU controller with 8 digital inputs and 6 digital outputs, with a switch panel to simulate inputs and a relay panel to show outputs. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Controller | 32-bit CPU controller |
| Digital inputs | 8 |
| Digital outputs | 6 |
| Program capacity | 8K steps |
| Data registers | 5K words |
| Pulse outputs | 4 points, 10 kHz |
| High-speed counters | 8 points: 4 at 20 kHz and 4 at 10 kHz |
| Communication | Modbus RTU protocol; link for PC communication |
| Digital input simulation panel | 6 toggle switches and 2 push switches, each giving a High or Low input |
| Input levels | High 24 V DC; Low 0 V |
| Built-in supply | +24 V DC |
| Digital output simulation panel | 8 SPDT relay outputs with LED indicators |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-FOT-10254 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab PLC Trainers?
| Model | PLC inputs and outputs | Input simulation | Output simulation and other parts |
|---|---|---|---|
| This trainer (EL-FOT-10254) | 8 digital in, 6 digital out | 6 toggle and 2 push switches | 8 SPDT relay outputs with LED indicators |
| Basic PLC Trainer | 8 digital in, 6 digital out | 6 toggle and 2 push switches | 8 LED indicators; on-board capacitive, inductive and photo pickups, limit switch, emergency switch, DC motor, stepper motor, buzzer, relay and red and green LED lamps |
| Advanced PLC Trainer | 24 digital in, 22 digital out; 4 analogue inputs (12-bit) and 2 analogue outputs | 14 toggle and 2 push switches; 4 analogue simulation potentiometers | 8 SPDT relay outputs with LED indicators; optional interfacing simulation modules such as traffic light, lift and conveyor belt |
All three have a 32-bit CPU controller, 8K-step program capacity and Modbus RTU support. The Basic PLC Trainer has an 8-input, 6-output controller like this one, with sensors, motors and lamps on the board, while the Advanced PLC Trainer has more digital I/O, analogue channels and optional application modules.
What Is the PLC Trainer Used For?
A PLC reads its inputs, runs the stored program and sets its outputs, over and over. On this trainer the toggle and push switches stand in for field sensors and push buttons, and the relays with their LEDs show what the program is switching, so students can write, test and correct programs at the bench before working on real machines. The high-speed counters and pulse outputs extend the exercises to fast signals: counters register pulses quicker than the normal program scan, for example from an encoder, and pulse outputs can drive devices such as stepper motor drives.
What to Specify When Ordering
- The number of trainers, for example one per student pair.
- Whether the Basic or Advanced PLC Trainer is wanted alongside it.
- Delivery destination, delivery terms and any tender reference.
Frequently Asked Questions
What can the high-speed counters and pulse outputs do?
There are 8 high-speed counter points, 4 rated at 20 kHz and 4 at 10 kHz, plus 4 pulse outputs at 10 kHz, so programs can count fast pulse trains and generate pulse signals beyond what ordinary inputs and outputs handle.
How does the PLC communicate with a PC?
Through its PC communication link. It also supports the Modbus RTU protocol, which is widely used to connect controllers with instruments and other devices.
What signal levels do the simulation switches give?
A High of 24 V DC or a Low of 0 V, taken from the trainer’s built-in +24 V DC supply.
What should be included in an export enquiry?
The quantity, destination country and port or city, delivery terms such as FOB or CIF, packing or labelling needs and any tender reference.
Who manufactures this PLC trainer?
Jain Laboratory Instruments Pvt Ltd (JLab) produces it at its works in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, an Indian manufacturer of electronics and automation trainers and other teaching equipment, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The trainer is assembled at JLab’s own works instead of being sourced from a trader, so colleges, training centres, dealers and importers deal with the manufacturer directly, and repeat orders and spares come from the same place. JLab exports worldwide and ships to buyers in every region, for example Barbados in Central America and the Caribbean, South Africa in Southern Africa, Ethiopia in East Africa, Sudan in North Africa and Argentina in South America. See the JLab lab tenders page for tender information.
Another PLC Trainer to Consider
- PLC Trainer with Sensors — an experiment box with relays, push buttons, indicator lamps and an adjustable potentiometer around its PLC.
The trainer is listed in the Fiber Optic Trainers section of Electronics Lab Equipments.
Request a Quote
Use the Add To Cart button to start an enquiry, or contact JLab through the contact page with the number of trainers, any other PLC trainers you want quoted and the delivery location.
Last updated: 22 October 2026
