Digital Constant Water Bath Manufacturer,Supplier and Exporter in India
Product Code : EL-MI-8769
Jlab Export is a leading Digital Constant Water Bath Manufacturer,and suppliers in India
Digital Constant Water Bath (code EL-MI-8769) is a stirred laboratory water bath with a digital temperature controller that holds the water from ambient to 100 °C with an accuracy of ±0.2 °C and a least count of 0.1 °C. An FHP motor stirrer keeps the temperature even, and the 18 x 12 x 10 in inner chamber is stainless steel. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Temperature control | Digital temperature controller |
| Temperature range | Ambient to 100 °C |
| Accuracy | ±0.2 °C |
| Least count | 0.1 °C |
| Stirring | FHP (fractional horsepower) motor-driven stirrer with speed regulator |
| Control panel | On the side: digital controller, mains switch, stirrer switch and stirrer regulator |
| Inner chamber | Stainless steel, 18 x 12 x 10 in (approx. 45.7 x 30.5 x 25.4 cm) |
| Outer body | Mild steel |
| Heater | 2000 W; heaters are matched to the chamber size |
| Power supply | 230 V AC, single phase |
| Quality check | Each water bath is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-MI-8769 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Water Baths?
| Model | Temperature control | Stirring | Chamber and openings |
|---|---|---|---|
| This water bath (EL-MI-8769) | Digital controller, ambient to 100 °C, ±0.2 °C, least count 0.1 °C | FHP motor stirrer | 18 x 12 x 10 in stainless steel chamber; 2000 W heater |
| Universal Water Bath | Capillary thermostat, ambient to 100 °C, ±1 °C | Not listed | 12 x 9 x 7 in (750 W) or 18 x 12 x 7 in (1500 W); stainless steel lid with a thermometer hole |
| Water Bath 6 Hole | Capillary thermostat, ambient to 100 °C | Not listed | Chamber 30 x 25 x 12 cm; six 7.5 cm holes and one 12.5 cm hole with concentric rings and lids |
Choose the digital model when an experiment depends on holding one temperature closely and evenly through the whole bath. The Universal Water Bath is a simpler thermostat bath in two sizes, and the 6-hole bath suits heating several flasks or basins at once.
What Is the Digital Constant Water Bath Used For?
A constant-temperature bath keeps samples at a set temperature for as long as an experiment needs it. The digital controller lets you set and read the temperature to 0.1 °C, and the motor-driven stirrer circulates the water so that a flask in one corner sits at the same temperature as one in the middle. That matters wherever a measured property changes with temperature — viscosity and density measurements, solubility and reaction-rate experiments in physical chemistry, and enzyme or incubation work in biology and microbiology labs at colleges, universities and research and quality-control laboratories.
Fill the stainless steel chamber with water before switching on (distilled water limits scale), switch on the mains, set the temperature on the controller and start the stirrer, adjusting its speed on the regulator so the water circulates without splashing. Let the bath settle at the set point before putting samples in, and check it now and then against a reference thermometer. After use, switch off, let the bath cool, drain it and dry the chamber.
What to Specify When Ordering
- Quantity — the minimum order is 10 water baths.
- Power supply — the bath runs on 230 V AC single phase with a 2000 W heater; make sure the laboratory circuit can carry the load.
- Lid, racks and thermometer — these are not described in the listing; state what you need and JLab confirms it in the quotation.
Frequently Asked Questions
How accurate is the temperature control?
The digital controller is listed at ±0.2 °C, with a least count of 0.1 °C, over a range from ambient to 100 °C.
Why does the bath have a stirrer?
Stirring keeps the water moving, so heat from the heater spreads evenly and every sample sees the same temperature. The FHP motor stirrer has its own switch and a speed regulator on the side control panel.
What size is the chamber?
The stainless steel inner chamber measures 18 x 12 x 10 in, about 45.7 x 30.5 x 25.4 cm, inside a mild steel outer body.
What power does it need?
230 V AC, single phase. The heater is rated at 2000 W.
How is it different from the Universal Water Bath?
The Universal Water Bath uses a capillary thermostat listed at ±1 °C and has no stirrer listed; this model has a digital controller at ±0.2 °C and a motor-driven stirrer for uniform temperature.
What information is needed for an export quotation?
Send the quantity, the destination country and port or city, the delivery terms you prefer (for example FOB or CIF), any accessories, packing or labelling needs, and a tender reference if applicable.
Who manufactures this water bath?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd, builds it at its works in Ambala, Haryana, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory instrument manufacturer in India, incorporated in 2017 and operating from Hargolal Road, Ambala, Haryana. This digital water bath is assembled in JLab’s own works rather than bought in from a trader, so universities, research labs, dealers and importers buy direct from the maker, each unit is visually inspected before it ships, and repeat orders and service parts are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Laos in Southeast Asia, Tajikistan in Central Asia, the Dominican Republic in Central America and the Caribbean, South Korea in East Asia and the UAE in the Middle East. For tenders, see the JLab lab tenders page.
Related Water Baths and Accessories
- Universal Water Bath — a capillary-thermostat bath in two sizes with a stainless steel lid.
- Water Bath 6 Hole — a thermostat bath with seven ring-fitted openings for flasks and basins.
- Lab Thermometer Red Alcohol Partial Immersion — a glass reference thermometer with permanently fused markings for checking the bath.
See more in the Measuring Instruments range or the wider Indian Instruments section.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), any accessories you need and your delivery location through the contact page.
Last updated: 9 October 2026
