LPG Hose Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-12922
Jlab Export is a leading LPG Hose Manufacturer,and suppliers in India
LPG hose carries gas from a cylinder regulator to a burner, stove or other low-pressure appliance. This rubber hose has an 8 mm inner diameter and a round section, and it grips firmly when pushed onto a standard 8 mm hose nozzle.
Specifications
| Inner diameter | 8 mm |
| Section | Round |
| Material | Rubber |
| Use | LPG cylinder connections |
| Grip | Strong grip on the hose nozzle |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Practicals on Safe Gas Connections
Before burners are used in a chemistry or physics lab, students learn to make and check a gas connection. They push one end of the hose over the nozzle of the LPG Cylinder Regulator and the other over the inlet of a Bunsen Burner. A hose clip goes on each end, and soapy water on each joint shows any leak.
Teachers can then show what an old hose looks like: bent sharply, a hardened or sun-damaged hose shows fine cracks on the outside of the bend. Students also compare it with Rubber Pipe For Bunsen Burner, the pre-cut tubing with reinforced ends made for bench gas taps.
Frequently Asked Questions
What does a hissing sound near the hose or regulator mean?
Gas is escaping. Turn the gas off at the cylinder, put out any flame and open the windows. Then test the hose ends and the regulator joint with soapy water. A cracked hose or a push-fit that has worked loose is a common cause.
How often should the hose be checked?
Look along it before each lab session for cracks, cuts or hardening, and bend it gently to open up small cracks. Replace it as soon as damage shows, and on a regular schedule even if it looks sound.
How long should the hose be?
Only as long as the job needs. A short run keeps it off hot surfaces, out of walkways and away from the edge of the bench, where it can be pulled or trodden on.
Can it be used for oxygen or acetylene?
No. It is an LPG hose for low-pressure butane supply. Gas welding sets use their own welding hoses with right-hand oxygen and left-hand fuel gas fittings.
Other LPG Supply Items
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
.jpg)