Pipette Filler (Three Way 50ml) Manufacturer,Supplier and Exporter in India
Product Code : EL-SLE-4679
Jlab Export is a leading Pipette Filler (Three Way 50ml) Manufacturer,and suppliers in India
Pipette Filler (Three Way 50ml) (code EL-SLE-4679) is a red three-way pipette filler of 50 ml capacity for filling glass and plastic pipettes without mouth suction. Its three-valve design lets one valve release air, one draw liquid into the pipette and one release the liquid, so the filler stays on the pipette while the level is set and the liquid delivered. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Three-way pipette filler |
| Capacity | 50 ml |
| Colour | Red |
| Valves | Three: air release, drawing liquid into the pipette, releasing liquid |
| For use with | Glass and plastic pipettes |
| Quality check | Each filler is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-SLE-4679 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Pipette Fillers?
| Model | Capacity or size | Control |
|---|---|---|
| This three-way filler (EL-SLE-4679) | 50 ml | Three valves for air release, filling and emptying; red |
| Pipette Filler- Bulb | 25 ml or 50 ml | Plain red rubber bulb; the level is set with a fingertip after the bulb is removed |
| Pipette Filler Pump | Not stated | Thumb wheel to draw up or dispense; releaser for quick emptying |
Choose the three-way filler when students should set the meniscus and drain the pipette without taking the filler off, which keeps fingers away from the liquid. The plain bulb is simpler for basic transfers, and the pump-type filler gives fine thumb-wheel control.
What Is a Three-Way Pipette Filler Used For?
It replaces mouth pipetting in titrations and other measured transfers. In class 11 and 12 chemistry practicals students use it to pipette the solution to be titrated into a conical flask, and college, pharmacy and research labs use it with bulb and graduated pipettes for reagents that should not be handled by mouth or by finger.
Press the air-release valve and squeeze the bulb to empty it, then push the top of the pipette gently into the lower end of the filler. Press the filling valve to draw liquid just above the mark, use the release valve to lower the meniscus to the mark, and press it again to deliver the liquid. Keep the liquid below the filler so it never enters the bulb, insert and remove pipettes with a gentle twist to avoid breaking them, and rinse and dry the filler if any liquid gets in.
What to Specify When Ordering
- Quantity — the minimum order is 10 units; labs often order one filler per titration bench.
- Pipette size — mention the pipette capacities and top diameters you use so JLab can confirm the fit.
- Other fillers and pipettes — plain bulbs or pipettes can be added to the same enquiry.
Frequently Asked Questions
What does “three way” mean?
It has three valves. One lets air out of the bulb, one draws liquid up into the pipette and one releases the liquid, so filling, levelling and emptying are all done with the filler in place.
What is its capacity?
50 ml. It is red and is meant for glass and plastic pipettes.
How does it differ from a plain bulb filler?
A plain bulb is removed after filling and the level is set with a fingertip. The three-way filler controls filling and draining through its valves, so it stays on the pipette and the user does not touch the pipette top.
What material is it made of?
The listing does not state the material. Ask JLab if you need to confirm it for a particular reagent or method.
What is needed for an export quotation?
Send the quantity, the destination country and port or city, your preferred delivery terms (for example FOB or CIF), any packing or labelling needs, and the tender reference if the order is for a tender.
Who manufactures this pipette filler?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd, makes it at its works in Ambala, Haryana, India, and quotes for it directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a maker of chemistry lab accessories and teaching apparatus in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The three-way filler is produced at JLab’s own works, not sourced from a trader, so schools, colleges, dealers and importers buy direct from the factory, each filler is visually inspected before dispatch, and repeat orders are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region, for example Sudan in North Africa, Sri Lanka in South Asia, Uzbekistan in Central Asia, Portugal in Southern Europe and Argentina in South America. Institutions buying by tender can see the JLab lab tenders page.
Related Pipetting Items
- Pipette Filler- Bulb — a plain red rubber bulb in 25 ml or 50 ml.
- Pipette Bulb — a finger-pressure bulb in several sizes.
- Pipette Filler Pump — a thumb-wheel pipette filler that opens for cleaning.
- Bulb Pipettes, Class B Soda Glass, One Mark JLab — one-mark pipettes to use with the filler.
Browse the School Lab Equipment range for more chemistry accessories.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), the pipettes you will use it with, and your delivery location through the contact page.
Last updated: 4 October 2026
