Test Sieve Manufacturer,Supplier and Exporter in India
Product Code : EL-ELA-5414
Jlab Export is a leading Test Sieve Manufacturer,and suppliers in India
Test Sieve (code EL-ELA-5414) is a laboratory sieve for particle-size grading of soils, sand, aggregates and powders in school, college, civil engineering and research labs. The standard model has a 200 mm diameter brass frame with stainless steel mesh, made in every mesh size in a 50 mm full-height frame, and 300 mm diameter sieves with stainless steel frames are also offered. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Diameter (standard model) | 200 mm |
| Frame (200 mm model) | Brass |
| Mesh | Stainless steel |
| Full-height frames | 50 mm high, available in all mesh sizes |
| Half-height frames | 25 mm high, for mesh sizes of 5.6 mm and smaller |
| Larger model | 300 mm diameter sieves with stainless steel frames |
| Mesh size | Specify the aperture(s) in your enquiry |
| Quality check | Each sieve is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| This listing covers | The sieve; lid, receiver pan and sieve shaker are not stated as included |
| Product code | EL-ELA-5414 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab Test Sieves?
| Model | Diameter | Frame and mesh (as listed) |
|---|---|---|
| This test sieve (EL-ELA-5414) | 200 mm; also 300 mm | Brass frame (50 mm full height, or 25 mm half height for 5.6 mm and finer), stainless steel mesh; 300 mm model with stainless steel frame |
| Test Sieves | 8 in | One-piece spun brass frame; stainless steel or phosphor bronze cloth; lid and receiver listed |
| Laboratory Testing Sieves | 12 in | Stainless steel or phosphor bronze wire mesh |
| G.I Test Sieve | 45 cm | Galvanised iron; for coarse aggregate |
Choose this sieve when you need brass-framed 200 mm sieves with a choice of full- or half-height frames, or stainless-framed 300 mm sieves for larger samples.
What Is a Test Sieve Used For?
Test sieves carry out sieve analysis — finding how much of a sample falls into each particle-size range. Civil engineering and geology labs grade sand, soil and aggregate with them, pharmacy and food labs check powders and granules, and in school science a sieve shows how a mixture is separated by particle size, a class 6 topic. Sieves of different apertures are nested with the coarsest on top and a receiver pan at the bottom; the stack is shaken by hand or on a sieve shaker, and the material retained on each sieve is weighed. Half-height frames let more sieves fit into a stack of the same height.
Do not overload a sieve, and never push particles through the mesh with a pointed tool. Clean the mesh from below with a soft brush, wash and dry it fully before storing, and keep sieves in a stack or rack so the mesh is not dented.
What to Specify When Ordering
- Diameter and frame — 200 mm brass (full or half height) or 300 mm stainless steel.
- Mesh sizes — list every aperture you need; half-height frames are offered for 5.6 mm and smaller.
- Quantity — the minimum order is 10 units.
- Lid, receiver pan and shaker — ask for them in the same enquiry if your lab needs a complete set.
Frequently Asked Questions
What sizes are these test sieves made in?
The standard sieve is 200 mm in diameter with a brass frame and stainless steel mesh; 300 mm diameter sieves with stainless steel frames are also listed. State the mesh apertures you need.
What is the difference between the full-height and half-height frames?
Full-height frames are 50 mm high and available in all mesh sizes. Half-height frames are 25 mm high and offered for mesh sizes of 5.6 mm and smaller; they let you fit more sieves into one stack.
Are a lid and receiver pan included?
They are not stated as part of this listing. Ask for them in your enquiry; the spun-brass Test Sieves listing names a lid and receiver.
Can these sieves be used on a sieve shaker?
Yes, sieve stacks are commonly run on a shaker. JLab’s Sieve Shaker is listed as taking 200 mm diameter sieves; confirm the stack height with JLab.
Who manufactures these test sieves?
Jain Laboratory Instruments Pvt Ltd (JLab) makes them at its works in Ambala, Haryana, India, and quotes for them directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory equipment manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. These test sieves are made at JLab’s own works rather than bought from a trader, so colleges, testing labs, dealers and importers buy them factory-direct and replacement sieves come from the same maker. JLab exports worldwide and ships to buyers in every region — for example the USA in North America, Italy in Southern Europe, Japan in East Asia, Ireland in Western Europe and Turkmenistan in Central Asia. Tender buyers can find details on the JLab lab tenders page.
Sieve Analysis Equipment
- Sieve Shaker — a motor-driven shaker for stacks of 200 mm sieves.
- Test Sieves — one-piece spun-brass sieves listed with a lid and receiver.
- G.I Test Sieve — a large galvanised-iron sieve for coarse aggregate.
- Soil Hydrometer — a glass hydrometer for grain-size analysis of soils.
See more in the Educational Laboratory Apparatus range or the full Laboratory Apparatus range.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), the diameter, frame height and mesh apertures you need and your delivery location through the contact page.
Last updated: 9 October 2026
