Water Bath Single Wall Manufacturer,Supplier and Exporter in India

Product Code : EL-SLE-5627
Jlab Export is a leading Water Bath Single Wall Manufacturer,and suppliers in India

Water Bath Single Wall (code EL-SLE-5627) is a rectangular electric water bath with a stainless steel chamber of 425 x 325 x 100 mm, used to heat test tubes, flasks and dishes gently in school and college science labs. Its top has 12 holes of 75 mm with concentric rings, and a 1 kW heater with a cut-out device warms the water. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.

Specifications

How Does It Compare with Other JLab Water Baths?

Choose this single-wall model when a whole class needs to warm many tubes at once on its own electric heater; the double-wall baths hold their heat better and the thermostatic electric bath suits work at a set temperature, while the copper and aluminium baths are simple vessels for heating over a burner.

What Is a Single-Wall Water Bath Used For?

A laboratory water bath heats samples evenly and never above the boiling point of water, and it keeps open flames away from flammable liquids. In class 10 biology the starch test for photosynthesis needs a leaf boiled in alcohol, which is done in a test tube or beaker standing in hot water rather than over a burner. In class 12 chemistry practicals, tubes for the Fehling’s and Benedict’s tests on carbohydrates are warmed in a water bath, and in general chemistry it is used to evaporate solutions slowly in a dish. The concentric rings let each 75 mm opening be narrowed to seat a small tube or widened for a flask, so twelve students or pairs can share one bath.

Fill the chamber with water above the heater before switching on, connect it only to an earthed socket (the 3-core cable carries an earth), and keep the water level up during long sessions using the level tubules. Because the bath has a single wall with no insulating jacket, the outer surface gets hot, so place it on a heat-resistant bench away from the edge. Drain and dry the chamber after use; distilled water reduces scale on the heater.

What to Specify When Ordering

• Mains supply — state your voltage and plug type so JLab can confirm the electrical fit.
• Insulation — this single-wall bath, or a double-wall model if you need better heat retention.
• Quantity — the minimum order is 10 water baths.
• Accessories — thermometers, test tube holders and evaporating basins are separate items and can be quoted together.

Frequently Asked Questions

What is the chamber size and how many holes does it have?
The stainless steel chamber measures 425 x 325 x 100 mm, and the top has 12 holes of 75 mm, each with concentric rings to suit different vessel sizes.

Does this water bath have a thermostat?
No thermostat or temperature range is given in this listing; it lists a 1 kW heater with a cut-out device. If you need to hold a set temperature, compare the thermostatic Electric Water Bath linked above, or ask JLab about options.

What does single wall mean?
The chamber has one wall with no insulated outer jacket. It is simpler and lighter than a double-wall bath, but it loses heat faster and its outside gets hot during use.

What power supply does it need?
The listing gives a 1 kW heater, a connector plug and 1 m of 3-core cable but not the supply voltage. Tell JLab your mains voltage and plug type when you enquire.

Is a thermometer included?
No thermometer is listed with this bath. Laboratory thermometers and thermometer holders are separate items, linked below.

What should I send for an export quotation?
Send the quantity, destination country and port or city, delivery terms such as FOB or CIF, your mains voltage and plug type, any packing or labelling needs, and the tender reference if there is one.

Who manufactures this water bath?
JLab, the trading name of Jain Laboratory Instruments Pvt Ltd, makes it at its works in Ambala, Haryana, India.

OEM Manufacturer

JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory equipment manufacturer in India that was incorporated in 2017 and works from Hargolal Road, Ambala, Haryana. Water baths like this one are built at JLab’s own works rather than sourced from a trader, so schools, colleges, dealers and importers order factory-direct, each unit is visually checked before dispatch, and repeat orders and spare parts are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example Costa Rica in Central America and the Caribbean, the USA in North America, Paraguay in South America, Rwanda in East Africa and Tajikistan in Central Asia. For tender purchases see the JLab lab tenders page.

Useful with This Water Bath

• Laboratory Thermometer — a liquid-in-glass thermometer for checking the water temperature.
• Thermometer Holder — clips on a vessel edge to hold a thermometer upright.
• Test Tube Holder (Wooden) — peg-type holder for lifting hot tubes out of the bath.
• Evaporating Basin — a wide, shallow basin for evaporating solutions over the bath.

See the full School Lab Equipment range.

Request a Quote

Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), your mains voltage and plug type, any thermometers or holders you need, and the delivery location through the contact page.

Last updated: 4 October 2026