Analog Digital Circuits Development Platform Manufacturer,Supplier and Exporter in India
Product Code : EL-BE-10491
Jlab Export is a leading Analog Digital Circuits Development Platform Manufacturer,and suppliers in India
Analog Digital Circuits Development Platform (code EL-BE-10491) is a combined trainer on which college and university laboratories perform both analog and digital electronics experiments on a single platform. Circuits go together on a solderless breadboard without soldering, and the functional blocks are marked on the board mimic, with every connection and control clearly labelled. The platform is built by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Signal source | On-board sine/square/TTL generator |
| Power supplies | On-board DC and AC power supplies |
| Digital inputs and outputs | On-board 8-bit data switches and 8-bit LED display |
| Other on-board items | Logic probe, speaker and potentiometers |
| Circuit building | Solderless breadboard |
| Operation | Self-contained and easy to operate |
| Learning support | Free e-learning course |
| Quality check | Each platform is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-BE-10491 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with the Single-Subject Platforms?
| Model | Subject area | Signal source | Supplies, switches and aids |
|---|---|---|---|
| This platform (EL-BE-10491) | Analog and digital electronics | Sine/square/TTL generator | DC and AC supplies; 8-bit data switches and LED display; logic probe, speaker, potentiometers |
| Digital Circuits Development Platform (8-bit) | Digital electronics | Pulse generator with TTL/CMOS mode | DC supplies; pulser and 8-bit data switches; bicolour 8-bit LED display; BCD to seven-segment display; logic probe |
| Analog Circuits Development Platform | Analog electronics | Function and modulation generators | DC and AC supplies; toggle switches, potentiometers; continuity tester |
Choose the combined platform when one board has to carry both halves of an electronics course, from transistor regulators and op-amp circuits to counters and code converters. The Digital and the Analog Circuits Development Platforms are each designed around one of the two subjects.
What Is the Analog Digital Circuits Development Platform Used For?
It serves analog and digital electronics laboratories, and it is also useful for building and testing circuits and for electronics projects while learning the subject. The analog experiments are the CB, CE and CC configurations of an NPN transistor and a CE amplifier circuit; the Zener diode and transistor series and shunt circuits as voltage regulators; the op-amp in inverting configuration, the gain characteristics of a non-inverting amplifier and the voltage follower; low-pass, high-pass, band-pass and active notch filters; and the operation of a Wheatstone bridge.
On the digital side students work through logic gates and universal gates, a binary adder and a 2-bit binary subtracter, binary to Gray, Gray to binary and binary to Excess-3 code conversion, an 8 to 3 line encoder and a 3 to 8 line decoder, the characteristics of various flip-flops, a 4-bit binary up-down counter, a Johnson counter, a 4-bit serial-in parallel-out shift register and a crystal oscillator.
What to Specify When Ordering
- Platform — this combined model or one of the single-subject platforms compared above.
- Quantity of platforms.
- Op-amp and filter trainers — the related items below are separate and can join the same enquiry.
Frequently Asked Questions
What does the Wheatstone bridge experiment show?
A Wheatstone bridge has four resistive arms with a detector across the middle. When the bridge is balanced the detector reads zero, and the unknown resistance follows from the ratio of the other three, which is the principle behind many sensor and measuring circuits.
What is a voltage follower?
It is an op-amp whose output is tied straight back to its inverting input while the signal goes to the non-inverting input. The gain is unity, but the very high input impedance and low output impedance make it a buffer between a weak source and a load.
How does a Johnson counter work?
It is a shift register whose last output is inverted and fed back to the first stage. A chain of flip-flops then steps through twice as many states as there are flip-flops, with only one bit changing at each clock pulse.
Why convert binary numbers to Gray code?
In Gray code, successive values differ in a single bit, so a reading taken while a value is changing cannot jump to a far-off number. That is why Gray code is used in position encoders and in some counters.
What should be sent for an international quotation?
Send the number of platforms required, the country and port or city of delivery, the delivery terms you would like (FOB or CIF, say), any labelling or packing instructions, and a tender reference if there is one.
Who makes the Analog Digital Circuits Development Platform?
It is manufactured in Ambala, Haryana, by Jain Laboratory Instruments Pvt Ltd under its JLab name, and JLab quotes for it as the maker.
OEM Manufacturer
Under the JLab name, Jain Laboratory Instruments Pvt Ltd manufactures electronics trainers and educational laboratory equipment in India; the company was incorporated in 2017 and is based on Hargolal Road, Ambala, Haryana. This combined platform is made in JLab's own works and does not pass through a trader, so universities, colleges, dealers and importers buy it from the factory, each unit is visually inspected before dispatch, and later orders are served by the manufacturer. JLab exports worldwide and ships to buyers in every region — Mongolia in East Asia, Kazakhstan in Central Asia, Moldova in Eastern Europe, Brunei in Southeast Asia and Namibia in Southern Africa are a few examples. See the JLab lab tenders page for tender information.
Related Electronics Trainers
- Digital Circuits Development Platform (8-bit data switches and LED display) — compared above; designed for digital electronics experiments.
- Analog Circuits Development Platform — compared above; designed for analog electronics experiments.
- Advanced Analog Circuits Development Platform — analog platform with on-board voltage, current and frequency measurement and a PC interface.
- Experimentation of OP-AMP Characteristics — op-amp trainer with an on-board function generator (sine, square and triangular waves) and two variable DC supplies.
- Experimentation with Active Filters — active filter trainer with an inbuilt function generator of selectable frequency range.
More trainers are listed in the Basic Electronics range and the full Electronics Lab Equipments section.
Request a Quote
For a quotation, click the Add To Cart enquiry button on this page or write in through the contact page with the quantity and the delivery destination.
Last updated: 22 October 2026
