Epoxy Resin Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13045
Jlab Export is a leading Epoxy Resin Manufacturer,and suppliers in India
This aluminium-filled epoxy resin is a paste for bonding and filling metal parts in the workshop. It sticks to aluminium and other metals, and also to ceramics, wood, concrete and glass. Each pack holds 6.5 oz. Being a paste, it stays where it is pressed and can be built up in a hole or along a joint.
Specifications
| Type | Aluminium-filled epoxy resin |
| Form | Paste |
| Size | 6.5 oz |
| Bonds to | Aluminium and other metals, ceramics, wood, concrete, glass |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with Epoxy Repairs
In a fitting or sheet metal shop, students can bond two strips of Aluminium Sheet in a lap joint, and a second pair cut from Galvanized Steel Sheet. Each face is first scrubbed bright with a Wire Brush and wiped free of oil. Once the paste has cured, the joints are pulled apart in a vice and students compare how each metal held.
A second exercise is filling a dent, pit or small hole in a metal part. The paste is pressed well into the cavity, left a little proud and filed flush once it is hard. Teachers can use the job to show how much a clean, roughened surface matters to a bond.
Frequently Asked Questions
What materials will this epoxy bond?
It bonds aluminium and other metals, ceramics, wood, concrete and glass. Both surfaces should be clean, dry and free of oil or loose paint. Plastics are not in that list, so try it on a scrap piece first if a plastic part needs repair.
How should the surface be prepared?
Remove paint, rust and grease, then roughen the area with a wire brush or abrasive paper so the paste has something to key into. Wipe off the dust and apply the paste soon after, before the surface picks up fresh dirt or moisture.
How long does it take to harden?
Curing time depends on the room temperature and the thickness of the layer. Warmth speeds it up and cold slows it down. Follow the directions on the pack, and do not load or file the repair until it is fully hard.
Why is the resin filled with aluminium?
The aluminium filler turns the resin into a stiff paste that can fill a hole or dent without running out. Once cured, the repair can be filed and sanded to shape along with the part around it.
How should it be stored and handled?
Keep the pack closed and store it in a cool, dry place away from heat and sunlight. Wear gloves when working with the paste, keep it off the skin and work in a room with good ventilation.
Other Repair and Joining Supplies
- Brazing Rod (bronze, for flame-brazed metal joints)
- PU Foam
- Anti-Rust Paint
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
