Fine Analytical Balance Manufacturer,Supplier and Exporter in India

Product Code : EL-LE-10658
Jlab Export is a leading Fine Analytical Balance Manufacturer,and suppliers in India

Fine Analytical Balance (code EL-LE-10658) is a single-pan analytical balance with a 60 g capacity and 0.1 mg readability, used to weigh small samples and standards in college, university and research laboratories. A draft shield chamber around the pan reduces the effect of air movement on the reading. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.

Specifications

How Does It Compare with Other JLab Electronic Balances?

Choose this balance for routine analytical weighing up to 60 g at 0.1 mg, with a draft shield chamber and a choice of weighing units. The Digital Analytical Balance range goes up to 220 g at the same readability, and the Semi Micro Balance suits work that has to be read to 0.01 mg.

What Is the Fine Analytical Balance Used For?

An analytical balance is used wherever a mass has to be known to a tenth of a milligram: weighing a primary standard such as oxalic acid to make a standard solution, weighing precipitates and residues in gravimetric analysis, and weighing small samples for instrumental analysis. With a 60 g capacity, this electronic analytical balance is meant for small containers and samples rather than bulk weighing. Typical settings are college and university chemistry and pharmacy teaching labs, quality-control and research laboratories, and senior-secondary chemistry practicals in class 11 and 12 where standard solutions are prepared by mass.

The hanger lets a sample be suspended beneath the balance, an arrangement used in some density determinations, and the RS-232C interface / PS2 output allows results to be passed to a printer or computer for records. Like any balance that reads to 0.1 mg, it gives its most consistent results on a firm, level bench away from draughts and vibration.

What to Specify When Ordering

• Quantity — the number of balances needed for each laboratory or teaching bench.
• Mains supply — the balance is listed for 210–240 V, 50–60 Hz; state the destination country with your enquiry.
• Data output — mention it if results are to go to a printer or computer through the RS-232C / PS2 output.
• Weighing accessories — weighing boats and weighing bottles are separate items that can be quoted on the same enquiry.

Frequently Asked Questions

What are the capacity and readability of this balance?
It weighs up to 60 g and reads to 0.1 mg, which is 0.0001 g or four decimal places of a gram. The listed verification interval is 0.001 g.

What is the difference between readability and verification interval?
Readability is the smallest step shown on the display, here 0.1 mg. The verification interval, here 0.001 g, is the value used when a balance is classified and verified, and it can be larger than the readability, so the two figures are consistent.

Why does the balance have a draft shield chamber?
At 0.1 mg readability, slight air movement around the pan shows on the display. The draft shield chamber encloses the pan to reduce these interfering ambient effects, and its spacious interior leaves room for the weighing container.

Can samples be weighed below the balance?
Yes. A hanger for below-balance weighing is listed among the standard features, so a sample can be suspended under the balance instead of being placed on the pan.

How does it differ from the Semi Micro Balance?
This balance weighs to 60 g at 0.1 mg. The Semi Micro Balance is listed with 30 g / 182 g capacity, 0.01 mg / 0.1 mg readability and motorised internal calibration, so it is the one to choose when readings to 0.01 mg are needed.

What information is needed for an export quotation?
Send the number of balances, the destination country and port or city, your preferred delivery terms (for example FOB or CIF), any packing or labelling requirements, and the tender reference if one applies.

Who manufactures the Fine Analytical Balance?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, builds it at its works in Ambala, Haryana, India, and handles enquiries for it directly.

OEM Manufacturer

JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of laboratory instruments and equipment in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. This analytical balance is produced at JLab’s own works instead of being bought from a trader, so schools, colleges, dealers and importers deal with the maker directly, and repeat orders and spares are handled by the same company. JLab exports worldwide and ships to buyers in every region — for example France in Western Europe, Cameroon in Central Africa, Costa Rica in Central America and the Caribbean, Canada in North America and Greece in Southern Europe. Institutions buying through a tender can find details on the JLab lab tenders page.

Other Balances and Weighing Accessories

• Digital Analytical Balance (external calibration, backlit LCD) — an alternative with models up to 220 g at 0.1 mg readability.
• Semi Micro Balance — for weighing that has to be read to 0.01 mg.
• Analytical Balance (mechanical short-beam) — a mechanical alternative with a rider scale and agate knife edges.
• Weighing Boat — a disposable polystyrene boat that holds the sample on the pan while it is weighed.
• Weighing Bottle (borosilicate glass) — a glass bottle for weighing solids.

Each is a separate item. Browse more instruments under Laboratory Equipment in the Laboratory Supplies range.

Request a Quote

To enquire, press the Add To Cart button on this page or write through the contact page, giving the number of balances, the delivery country and city, and any weighing boats or bottles you want quoted with them.

Last updated: 15 October 2026