Hydraulic Trainer Electrohydraulic Manufacturer,Supplier and Exporter in India
Product Code : EL-TL-10064
Jlab Export is a leading Hydraulic Trainer Electrohydraulic Manufacturer,and suppliers in India
Hydraulic Trainer Electrohydraulic (code EL-TL-10064) is a mobile oil-hydraulic trainer supplied with software for the simulation of hydraulic circuits, so a circuit can be worked out on screen and then built with real components. Its hardware matches the Classic model, with 40 bar operating pressure, 80 bar test pressure and two pressure relief valves. Its cylinders, like the rest of the trainer, are made by JLab in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Software | Simulation of hydraulic circuits |
| Operating pressure | 40 bar |
| Test pressure | 80 bar |
| Cylinder pressure limit | Up to 160 bar |
| Hose pressure limit | 188 bar |
| Pressure relief valves | 2, one inside the tank |
| Pump–motor run-out | Below 0.020 mm (bell housing) |
| Unit | Mobile, self-contained; electrical connection only |
| Quality check | Each trainer is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Product code | EL-TL-10064 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Pairing Simulation with Real Hardware
With the simulation software, a class can lay out a circuit and check the order of its valves and connections before any oil flows. The same circuit is then assembled on the front mounting plate, with lines made up using the fixtures for pipe bending and ferrule fittings. Realistic industrial circuits are demonstrated this way, and the unit needs nothing but an electrical connection.
Build of the Power Unit and Cylinders
A special bell housing between pump and motor keeps run-out under 0.020 mm, and one of the two relief valves is placed inside the tank. Hoses withstand 188 bar and the cylinders up to 160 bar, well above the 40 bar working level. The circuit is laid out with little pressure drop to stop the oil overheating, and the system is flushed at high velocity with separate oil to keep it clean. Cylinder tubes are precision honed, and the piston rods hardened, ground and hard-chrome plated.
Other Hydraulic and Electropneumatic Trainers
- Hydraulic Trainer Classic — the same hydraulic hardware without the simulation software.
- PLC Based Electro Hydraulic Trainer — adds PLC control, proximity sensors and solenoid valves.
- Hydraulic Trainer Kit — experiments with 4/3 way valves, a sequence valve and speed control.
- Electropneumatic Training — relay, sensor and solenoid-valve circuits on compressed air.
Find it with the rest of Thermodynamics Lab, a section of Fluid Mechanics and Hydraulics Lab Equipment.
Request a Quote
Add the trainer with Add To Cart, or send the quantity, your institution name and the delivery address through our contact page.
Last updated: 30 October 2026
