MAPP Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13069
Jlab Export is a leading MAPP Manufacturer,and suppliers in India
This torch set runs on Bernzomatic MAP-Pro, a propylene-based fuel gas that burns hotter than propane and is sold in place of the original MAPP gas. It comes with three 400 g (14.1 oz) canisters and one torch. JLab supplies the set for brazing, soldering and heating work in workshops and training labs.
Specifications
| Brand | Bernzomatic |
| Fuel | MAP-Pro gas (MAP-type fuel gas) |
| Canister size | 400 g (14.1 oz) |
| Set contents | 3 gas canisters and 1 torch |
| Flame | Swirl flame |
| Ignition | Instant on/off |
| Regulation | Pressure regulated, also when inverted |
| Torch body | Cast |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 3–5 working days |
| Supplied by | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Brazing and Soldering Practicals
In a refrigeration lab, trainees practise copper joints on short lengths of Copper Pipe fitted with an Elbow Fitting. Copper-to-copper joints are made with a phosphor-copper Brazing Rod. The swirl flame heats the fitting evenly until the rod flows into the gap.
The same torch heats aluminium for repairs with the Aluminum Rod and its Flux. Teachers point out that a hand torch handles small pipe sizes well, while large lines and heavy fittings call for an oxy-fuel set.
Frequently Asked Questions
How is MAP-Pro different from propane?
MAP-Pro burns hotter than propane, so it brings copper and steel up to brazing heat faster. Many hand torches accept either gas, but the hotter flame saves time on heavier joints.
Can it braze copper refrigeration pipe?
Yes, for small pipe sizes and fittings. Use a phosphor-copper or silver brazing rod and keep the flame moving round the joint. Large lines, or many joints in a row, go quicker with an oxy-acetylene set.
Can the torch be used upside down?
Yes. The torch is pressure regulated, so the flame stays steady when it is turned over to reach the underside of a joint. Keep the canister itself away from the flame and the hot work.
How should the canisters be stored?
Store them in a cool, ventilated place out of direct sun and away from heat and sparks. Take the torch off the canister after use and fit the cap before putting it away.
Is this the original MAPP gas?
No. The original MAPP gas is no longer made. MAP-Pro is a propylene-based gas sold in its place for the same brazing, soldering and heating jobs.
Other Torch and Brazing Supplies
- Sif Flux (bronze brazing flux)
- Nitrogen Flow Regulator Meter For Brazing
- Pinch-Off Plier (closes off copper tubing)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
