Oil Can Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-9280
Jlab Export is a leading Oil Can Manufacturer,and suppliers in India
This trigger-action oil can holds 250 cc and puts a few drops of oil right where a machine needs them. Each squeeze of the trigger pumps oil out through the spout and the flow stops when it is released. A brass filter keeps grit in the oil away from the pump, and the head is die cast.
Specifications
| Capacity | 250 cc |
| Head | Die cast |
| Filter | Brass |
| Operation | Positive trigger action |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice in Machine Lubrication
Oiling the machines is part of every workshop session. Before starting the All Geared Lathe, students oil the bed ways, the cross slide and the oil points on the saddle and tailstock. On the Drill Press they oil the column and the quill, then wipe off the surplus with a cloth.
Hand tools get the same care. A drop on the screw and slide of a Bench Vice keeps it turning freely. A film of light oil goes on the Oil Stone before a chisel is honed. Teachers also use the can to show how cutting oil is applied when steel is drilled or tapped.
Frequently Asked Questions
How much oil does the can hold?
It holds 250 cc, which is 250 ml. That is enough for a full round of oiling on several machines, and the can is still small enough to hold and work with one hand.
How does the trigger action work?
Squeezing the trigger works a small pump in the die cast head, which pushes oil up the spout. The flow stops as soon as you let go, so oil goes onto one point without spilling over the machine.
What oil should I put in it?
Use a clean light machine oil for slideways, spindles and hand tools, or a cutting oil for drilling and tapping. Thick oils and grease do not pass the filter and pump well. Keep one can for each oil so the two are not mixed.
Why does it have a brass filter?
The filter stops grit and chips that get into the oil from reaching the pump and the spout. Filtered oil keeps the pump working and keeps dirt out of the bearings and slides being oiled.
Other Workshop Upkeep and Storage Items
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
