Oil Stone Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-9281
Jlab Export is a leading Oil Stone Manufacturer,and suppliers in India
An oil stone hones the edges of chisels, plane irons, knives and scribers. This stone measures 200 x 50 x 25 mm (8 x 2 x 1 in). A light non-drying oil is recommended, which floats away the steel particles, but the stone may also be used dry. Carpenters, mechanics and engineers use it to bring dull tools back to a keen edge.
Specifications
| Size | 200 x 50 x 25 mm (8 x 2 x 1 in) |
| Lubricant | Light non-drying oil, or used dry |
| Use | Sharpening dull edge tools |
| Users | Carpenters, mechanics and engineers |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Tool Sharpening for Students and Teachers
In the carpentry shop, students sharpen a blade from the set of Mortise Chisels. They hold the bevel at its angle on the oiled stone and rub it along the full length with even pressure. Then they turn the chisel over and rub the flat back lightly to take off the burr.
In the fitting shop, a blunt point on a Scriber is touched up by rolling it lightly along the face of the stone. Teachers show how a burr forms and how to feel for it across the back of the edge, never along it. The stone is wiped clean after use and given fresh oil from an Oil Can at the next session.
Frequently Asked Questions
Should I use oil or use the stone dry?
The stone may be used dry, but a light non-drying oil is recommended. The oil carries the fine steel particles away so they do not clog the surface, and the stone keeps cutting. Once a stone has been used with oil, do not switch it to water.
Which oil is suitable?
Use a light, thin, non-drying oil such as honing oil or a light machine oil. Avoid cooking oils and linseed oil, which dry or turn sticky and fill the pores of the stone.
How big is the stone?
It measures 200 x 50 x 25 mm, or 8 x 2 x 1 in. The long face gives room for full strokes with chisels and knives. A blade wider than the stone can still be honed by holding it at a slight skew.
How do I keep the stone flat?
Work over the whole length and width of the face rather than one spot, so it wears evenly. When a hollow appears, rub the face on abrasive paper laid on a flat surface until it is level again.
What tools can I sharpen on it?
Chisels, plane irons, spokeshave cutters, knives, scribers and other edge tools used by carpenters, mechanics and engineers. Saw teeth and twist drills are sharpened with files and grinders instead.
Other Sharpening Stones and Edge Tools
- Sharpening Stone (combination fine and coarse stone)
- Saw Sharpening File Set
- Spokeshave Flat Face
- Chisel Set
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
