Home » Our Product » Technical and Vocational Education and Training TVET » Standard Welding Equipment Set » Plasma Cutting Machine

Plasma Cutting Machine Manufacturer,Supplier and Exporter in India

Product Code : EL-SWES-8747
Jlab Export is a leading Plasma Cutting Machine Manufacturer,and suppliers in India

This plasma cutting machine profiles mild steel and stainless steel plate and aluminium sheet up to 30 mm thick. It is built in stainless steel and cuts at speeds above 4000 mm/min. It is offered with a cutting width of 3000–4000 mm and cutting lengths from 1000 mm to over 4000 mm.

Specifications

Materials cut	Mild steel and stainless steel plate, aluminium sheet
Maximum cutting thickness	30 mm
Maximum cutting speed	Over 4000 mm/min
Cutting length	1000–2000, 2000–3000, 3000–4000 or over 4000 mm
Maximum cutting width	3000–4000 mm
Plasma power source	Standard, high-speed or high-performance, to order
Material of construction	Stainless steel
Minimum order quantity	1 unit
Dispatch time	Usually 14–18 working days
Manufacturer	JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Plasma Cutting Practicals in the Fabrication Lab

Students cut straight strips, circles and slots from mild steel plate, then compare the kerf width, edge bevel and bottom dross at different speeds and plate thicknesses. Dross is ground off with the Angle Grinder, and parts are measured with a Steel Rule against the drawing.

In a fabrication project, plasma-cut parts are fitted up and joined with the Shielded Metal Arc Welding Machine. Anyone watching the cutting arc uses a filter of suitable shade, and operators wear Welding Leather Gloves to handle hot plate.

Frequently Asked Questions

How does plasma cutting work?
An electric arc is constricted through a narrow nozzle together with compressed air or another gas. The arc heats the gas into a plasma jet that melts the metal along the line, and the gas flow blows the molten metal out of the cut.

What thickness can it cut?
Up to 30 mm. Thinner plate cuts faster and cleaner. Near the maximum, slow the travel speed so the arc passes right through the plate and the lower edge stays free of heavy dross.

Which metals can it cut?
Mild steel and stainless steel plate and aluminium sheet. Because plasma melts the metal with an electric arc, it cuts stainless steel and aluminium, which an oxy-fuel cutting torch cannot cut cleanly.

Which bed size should I choose?
The cutting width is 3000–4000 mm, and the cutting length is offered in bands from 1000–2000 mm up to over 4000 mm. Choose the length that fits the biggest plates you plan to load, with space around the machine to handle them.

What is dross and how do I reduce it?
Dross is re-solidified metal left on the bottom edge of the cut. Cutting too slowly leaves a heavy bead that chips off easily, and cutting too fast leaves a small, hard bead. Match speed and current to the plate, and replace worn nozzles and electrodes.