Plunger Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-9292
Jlab Export is a leading Plunger Manufacturer,and suppliers in India
A plunger, or force cup, clears a blocked sink or wash basin by pushing and pulling water through the trap until the blockage breaks up. This one measures 140 x 88 mm, has a 450 mm handle and is made of plastic and rubber.
Specifications
| Type | Hand plunger (force cup) |
| Dimension | 140 x 88 mm |
| Handle length | 450 mm |
| Material | Plastic and rubber |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Plumbing Workshop Practice for Students
In the plumber trade at an ITI, students often fit a sink waste and trap on a practice board before they learn to clear one. They hold the pipe in a Pipe Vice to cut it to length, then assemble the line and test it with water. To clear a choke, they cover the basin overflow with a wet cloth and run in enough water to cover the cup. Then they work the handle in short, firm strokes.
If the blockage does not move, students undo the trap with a Pipe Wrench, clear it by hand and refit it. Teachers use the same exercise to explain how the water held in the trap stops drain smells from coming back into the room.
Frequently Asked Questions
Which blockages can a plunger clear?
It clears soft blockages such as hair, soap and food waste in sinks, wash basins and floor traps. The rim has to sit flat around the outlet so the cup can seal. A solid object stuck in the trap needs the trap taken off instead.
Why should the overflow be covered first?
A basin overflow, or the second bowl of a double sink, opens into the same drain. If it stays open, the push of the plunger escapes through it instead of acting on the blockage. Hold a wet cloth firmly over it while you plunge.
How much water should be in the sink?
Run in enough water to cover the cup. Water does not compress, so it carries each push and pull of the handle into the trap far better than trapped air does.
Can a plunger be used after a chemical drain cleaner?
It is better not to. Plunging can splash the chemical back out of the drain onto skin and eyes. Flush the drain with plenty of water first, or wear gloves and clear the trap by hand.
How should the plunger be cleaned and stored?
Rinse it in clean water after use, let it drain and dry, and store it upright in a dry place. Keep it away from heat and strong sunlight, which harden rubber over time.
Other Tools for Pipe Work
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
