Training Board for Gates Manufacturer,Supplier and Exporter in India
Product Code : EL-DET-1519
Jlab Export is a leading Training Board for Gates Manufacturer,and suppliers in India
Training Board for Gates (code EL-DET-1519) is a self-contained logic training board for studying the OR, AND and NAND gates and verifying their truth tables, and for building OR, NOR, NOT, AND and EX-OR functions from universal NAND gates. Four 2-input NAND gates, a 2-input OR gate and a 2-input AND gate sit on one panel with input switches and LED output indicators. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Experiments | Study of the OR, AND and NAND logic gates and verification of their truth tables; OR, NOR, NOT, AND and EX-OR functions made from NAND gates, with truth tables verified |
| Gates | Four 2-input NAND gates; one 2-input OR gate; one 2-input AND gate |
| Inputs | Two switches for binary logic input states |
| Output indication | Two LEDs driven by an LED driver circuit |
| Built-in power supply | +5 V DC at 100 mA, IC regulated, internally connected |
| Mains controls | Mains ON/OFF switch, fuse and jewel light |
| Supply required | 230 V ±10% at 50 Hz AC mains |
| Patch cords | Adequate number; stackable from the rear at both ends; 4 mm spring-loaded plugs; length ½ metre (0.5 m) |
| Panel terminals | Terminals and sockets on the panel for connections and observation of waveforms |
| Operating instructions | Detailed instructions giving the object, theory, design procedures, report suggestions and book references |
| Weight | 3 kg (approx.) |
| Dimensions | 340 (W) x 110 (H) x 210 (D) mm |
| Quality check | Each board is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-DET-1519 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with the JLab Logic Training Board?
| Board | Built-in supply | Gates on the panel | Experiments |
|---|---|---|---|
| Training Board for Gates (EL-DET-1519) | +5 V DC at 100 mA | Four 2-input NAND gates, a 2-input OR gate and a 2-input AND gate | OR, AND and NAND truth tables; OR, NOR, NOT, AND and EX-OR built from NAND gates |
| Logic Training Board | ±5 V DC at 500 mA | 3-input AND/NAND and OR/NOR gates; NOT/BUFFER outputs | Logic functions, functions of several variables, distributive, commutative and associative laws, De Morgan’s theorem |
This board concentrates on the basic gates and on the universal-NAND exercise with 2-input gates, while the Logic Training Board uses 3-input gates for Boolean laws and functions of several variables.
What Is the Training Board for Gates Used For?
Gate truth tables are usually among the first digital electronics practicals: students set the two inputs on the switches, watch the LEDs, and fill in the truth table of each gate for all four input combinations. The second part of the work shows why the NAND gate is called universal. Using only the NAND gates on the panel, students build NOT, AND, OR, NOR and EX-OR functions with the patch cords and confirm that each one reproduces the truth table of the real gate. This idea — that any logic function can be made from one type of gate — is a cornerstone of digital design, and the board turns it into a compact logic gates experiment kit for science and engineering students.
What to Specify When Ordering
- Board — this 2-input gate board, the 3-input Logic Training Board, or both for a complete set of gate practicals.
- Quantity — the number of boards for your digital electronics lab.
- Next boards in the course — the flip-flop, adder and IC trainers listed below are separate boards that can be quoted on the same enquiry.
Frequently Asked Questions
Why is the NAND gate called a universal gate?
Because every other logic function — NOT, AND, OR, NOR, EX-OR and any combination of them — can be built from NAND gates alone. The board lets students prove this with real gates rather than on paper.
Are four NAND gates enough for all these functions?
Yes. A NOT gate needs one NAND gate, AND needs two, OR needs three, and both NOR and EX-OR can be made with four, so each of these functions can be built from the four 2-input NAND gates on the panel.
How are inputs set and outputs seen?
Two switches give the binary logic input states, and two LEDs driven by an LED driver circuit show the output, so the truth table can be read directly from the panel.
How large is the board?
It measures 340 (W) x 110 (H) x 210 (D) mm and weighs about 3 kg.
What information is needed for an export quotation?
Send the number of boards, the destination country and port or city, your preferred delivery terms (for example FOB or CIF), any packing or labelling requirements, and the tender reference if the order is for a tender.
Who manufactures the Training Board for Gates?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes it at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a laboratory equipment and electronics trainer manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. This gate training board is produced at JLab’s own works, not sourced from a trader, so schools, colleges, polytechnics, dealers and importers buy it factory-direct, each board is visually inspected before dispatch, and repeat orders and spare parts are handled by the manufacturer. JLab exports worldwide and ships to buyers in every region — for example the USA in North America, Eswatini in Southern Africa, Iceland in Northern Europe, Samoa in Oceania and South Korea in East Asia. Details for tender buyers are on the JLab lab tenders page.
Related Digital Logic Trainers
- Logic Training Board — 3-input AND/NAND and OR/NOR gates for logic functions, Boolean laws and De Morgan’s theorem.
- Training Board of Flip Flops — NAND gates on a board for constructing RS, D, J-K, T and master-slave J-K flip-flops.
- 4-Bit Binary Full Adder and Subtractor — a 4-bit full adder IC and EX-OR gates for adding and subtracting two 4-bit binary numbers.
- Digital IC Trainer — IC sockets, eight logic switches and eight LED indicators for wiring circuits from separate ICs.
See the full Digital Electronics Trainer range or all Electronics Lab Equipments.
Request a Quote
Send an enquiry with the Add To Cart button on this page, or give JLab the number of boards, the delivery destination and any other trainers required through the contact page.
Last updated: 22 October 2026
