Transparent Vinyl Tube For Condensate Pumps Manufacturer,Supplier and Exporter in India
Product Code : EL-RACLE-12834
Jlab Export is a leading Transparent Vinyl Tube For Condensate Pumps Manufacturer,and suppliers in India
This clear, round vinyl tube carries water from the outlet of a condensate pump to the drain. It is the 6/9 size, the smaller of the two condensate tubes JLab offers. Through the transparent wall you can see water moving along the line and spot any blockage as it builds up.
Specifications
| Size | 6/9 |
| Material | Vinyl |
| Colour | Transparent |
| Shape | Round |
| Used for | Condensate pumps |
| Minimum order quantity | 50 units |
| Dispatch time | Usually 3–5 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises with Condensate Tubing
When students install a Condensate Removal Pump, this tube forms the discharge line. They cut it square with a sharp knife, push it fully onto the pump outlet and route it in gentle curves so it cannot kink.
Pouring a measured volume of water from a Measuring Cylinder into the drain pan lets the class follow the water along the clear tube. They also time how long the pump takes to clear it. Raising the outlet end in steps then shows how lift height cuts the flow.
Frequently Asked Questions
What do the figures 6/9 mean?
Condensate tube sizes written this way usually give the inside and outside diameters in millimetres. Read that way, this tube has a 6 mm bore and a 9 mm outside diameter. Check the outlet size of your pump before ordering.
Why use clear tube for condensate?
A transparent tube shows at a glance whether water is flowing, standing in a dip or held back by slime. Faults are easy to spot during service without taking the line apart.
How do I choose between this tube and the 10/14 size?
Use the size that fits your pump outlet and drain fitting. This 6/9 tube has the smaller bore. The Transparent Vinyl Tube For Condensate Pumps 10/14 has the larger bore, for pumps and drains made for it.
How do I keep the tube from kinking?
Avoid tight bends and clip long runs so the tube cannot sag into dips where water stands. Where the route turns sharply, a wide loop is better than a fold.
Other Items for Split AC Installation
- PVC (white PVC pipe)
- Anchor Bolt
- Split Air-Conditioner
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
