• +91-85699-09696

Ultrasonic Water Bath Manufacturer,Supplier and Exporter in India

Ultrasonic Water Bath

Product Code : EL-B-1955
Jlab Export is a leading Ultrasonic Water Bath Manufacturer,and suppliers in India

An ultrasonic bath cleans by cavitation. Transducers under the stainless steel tank turn high-frequency electrical energy into sound waves at 33 kHz. Tiny bubbles form and collapse in the liquid against every surface they reach and lift dirt from it. This bath also warms the liquid from 5 °C above ambient to 60 °C, and it has a digital timer, auto degassing and a pulse sweep mode.

Specifications

Capacities2, 3.5, 5, 7, 10, 20, 25 and 30 litres
TankStainless steel sheet (SS-304)
Outer bodyStainless steel, mirror polished
InsulationMineral glass wool
Operating frequency33 kHz ±3 kHz, automatic frequency tuning
TemperatureAmbient +5 °C to 60 °C, ±1 °C
ControllerMicroprocessor PID, LED display of set and process values
TimerDigital, 0–15 or 0–30 min depending on capacity
FunctionsPre-set auto degassing and pulse sweep
Supply220/230 V AC, works on 170–270 V AC input
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Practicals in Chemistry and Pharmacy Labs

Before a chromatography or titration practical, students degas a freshly made buffer or mobile phase by standing its Volumetric Flask in the bath for a few minutes. Gas then does not come out of solution later as bubbles in a pump or a Burette tip. Pharmacy students also sonicate powdered tablets with solvent so the drug dissolves fully before the solution is filtered and diluted.

For glassware care, groups clean pipettes, small parts and stained Beakers (Polypropylene) in warm detergent solution in the mesh basket, then compare them with pieces scrubbed by hand. Teachers can show cavitation itself by holding a strip of aluminium foil in the liquid for a short run. It comes out pitted with tiny holes.

Frequently Asked Questions

Why should fresh liquid be degassed before cleaning?
Fresh water holds dissolved air. The first bubbles fill with that gas, which cushions their collapse, so cleaning is weak. Run the auto degassing mode, or run the bath empty of items for a few minutes, before you load anything.

Can I place items straight on the tank floor?
No. Hang them in the mesh basket supplied with the bath, or stand them in a beaker held in the liquid. Items lying on the floor block the sound from the transducers and rub against the tank.

What liquid should go in the tank?
Water with a little laboratory detergent suits most glassware and metal parts. Keep the tank filled to its working level so the transducers never run dry. Solvents are better held in a closed beaker standing in the water than poured into the tank.

Why does an ultrasonic bath need heating and a timer?
Warm liquid cleans faster than cold, and the PID controller holds it anywhere from 5 °C above ambient to 60 °C. The timer, 0–15 or 0–30 minutes by capacity, ends each cycle so every batch gets the same treatment.

Which tank size should I order?
Choose a tank in which your biggest item lies fully under the liquid inside the basket. The 2 and 3.5 litre baths suit vials and small parts, and the 20 to 30 litre tanks take flasks and larger items. Cooling coils for a 6 litre chiller circulator are an option from 7 litres up.

Other Ultrasonic and Cleaning Units

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 12 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us