Serological Water Bath Manufacturer,Supplier and Exporter in India
Product Code : EL-B-1956
Jlab Export is a leading Serological Water Bath Manufacturer,and suppliers in India
A serological water bath holds racks of test tubes in warm water at a steady temperature for agglutination, inactivation, incubation and enzyme work. Here a capillary thermostat, set with a graduated knob, keeps the water within 0.5–1 °C of the setting. Three tank sizes take one, four or eight racks of tubes, and a pilot lamp shows when the bath is on.
Specifications
| Temperature control | Capillary thermostat with graduated knob, within 0.5–1 °C |
| Panel | Pilot lamp |
| Tank sizes | 300 x 175 x 175 mm (1 rack), 375 x 300 x 175 mm (4 racks), 605 x 300 x 175 mm (8 racks) |
| Capacities | 12, 18 and 32 litres |
| Supply | 220 V AC, 50 Hz, single phase |
| Not included | Racks, thermometer and stirrer |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 7–10 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Biochemistry Practicals for Students
A classic practical follows the action of rennet on milk. Students warm milk in Laboratory Test Tubes in the bath, add a few drops of rennet and time how long the milk takes to set. Repeating the test at several settings shows how temperature speeds up or stops an enzyme.
In a second exercise, tubes of diluted saliva are held at different settings for a fixed time and then cooled. Each is mixed with a solution of Starch Powder Water Soluble, and drops are tested with iodine at intervals. Saliva that was overheated leaves the blue colour in place, because the enzyme has been destroyed. A General Glass Thermometer in the water checks each setting, since the bath comes without one.
Frequently Asked Questions
Why are racks and a thermometer not included?
Labs use tubes of many diameters, so racks are chosen to fit the tubes you use and the tank you order. A separate glass thermometer in the water lets you check the thermostat setting before each session.
How steady is the water temperature?
The capillary thermostat keeps it within about 0.5 to 1 °C of the setting. The bath has no stirrer, so give the water time to settle after switching on and read the thermometer beside the tubes, not next to the heater.
Which tank size suits my lab?
Pick by the biggest batch of tubes you run at one time. The 300 x 175 x 175 mm tank takes one rack, the 375 x 300 mm tank four racks and the 605 x 300 mm tank eight racks.
How high should the water be?
Above the level of the liquid inside the tubes, so the whole sample warms evenly, but well below the tube mouths so water cannot splash in. Top it up with distilled water as it evaporates.
How do I keep the water clean?
Fill with distilled water, empty and dry the tank between long breaks, and wipe away any film on the walls. Water left standing warm grows algae and bacteria, which coat the tank and cloud the water.
Other Baths for Tube Work
- Water Bath Serological
- Dry Bath Incubator (metal blocks, no water)
- Water Bath Rectangular
- Water Bath Incubator Shaker
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 12 November 2026
