• +91-85699-09696

Water Bath Rectangular Manufacturer,Supplier and Exporter in India

Water Bath Rectangular

Product Code : EL-B-1958
Jlab Export is a leading Water Bath Rectangular Manufacturer,and suppliers in India

A rectangular water bath warms flasks, dishes and test tubes in heated water and holds them at one setting for long periods. This one has a stainless steel inner tank and glass wool insulation in a double wall. Its top cover has 75 mm holes with concentric rings, so vessels of different sizes can sit in the openings. It works from 5 °C above ambient to 95 °C.

Specifications

ConstructionDouble wall, gap filled with glass wool
Inner tankStainless steel
Outer bodyMild steel, stoving paint finish
Top cover75 mm (3 in) holes with concentric rings
Temperature range5 °C above ambient to 95 °C
ControlThermostat, ±0.5 °C, or microprocessor PID digital indicator-cum-controller
DisplayDigital temperature indicator
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Chemistry and Biology Practicals

For the reducing sugar test, students add Benedict’s Reagent (Test of Glucose) to food extracts in test tubes. The tubes then stand in the bath near its top setting for a few minutes. A green, orange or brick-red precipitate shows a reducing sugar such as glucose, and the colour gives a rough idea of how much is present.

The ring cover holds a China Dish (3 Inch) over the hot water, so a salt solution can be evaporated gently to its crystallisation point without spitting. Teachers also use the bath to keep melted agar liquid before pouring plates, or to warm reagents ahead of an enzyme practical.

Frequently Asked Questions

What are the concentric rings on the cover for?
Lifting out rings widens the opening to suit the vessel, up to the full 75 mm hole. The vessel rests in the opening with its lower part in the hot water or steam. The rings left in place keep heat and water vapour in the bath.

How hot can a water bath get?
This one works up to 95 °C. A water bath cannot go much higher, because water starts to boil a little above this setting and the heat goes into making steam. For hotter work, use an Oil Bath (High Temp) with Stirrer.

Thermostat or PID controller: which should I choose?
The thermostat holds the setting to ±0.5 °C and is set with a knob. The microprocessor PID controller is set digitally and eases off the heater as the water nears the setting, so it overshoots less after each change.

Why does the water level drop, and what should I top up with?
Water evaporates quickly near the top of the range, more so with rings removed. Top up with distilled water before the level falls near the heater. Tap water leaves scale on the tank and heater.

Other General Purpose Water Baths

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 12 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us