Block Making Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-8789
Jlab Export is a leading Block Making Machine Manufacturer,and suppliers in India
This hydraulic machine presses bricks four at a time on PVC pallets, under 100 ton of hydraulic pressure. Each brick is 230 x 110 x 75 mm with a frog. At 420 strokes an hour the rated output is 1680 bricks per hour. A pan mixer prepares the mix, and a 20 ft conveyor comes with the machine.
Specifications
| System | Hydraulic power compacting |
| Hydraulic pressure | 100 ton |
| Brick size | 230 x 110 x 75 mm (with frog) |
| Bricks per stroke | 4 |
| Strokes per hour | 420 (7 per minute) |
| Rated output | 1680 bricks per hour |
| Pallet | PVC, 600 x 300 x 25 mm, 4 bricks per pallet |
| Conveyor | 20 ft long |
| Pan mixer | Side wall 500 mm high, 10 mm bottom plate, 5 mm side wall plate, 7.5 HP motor at 1480 rpm, 3 phase |
| Total power required | 31.5 HP |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Practicals for Building Materials Students
Civil engineering and building construction students can follow a batch from the pan mixer to the finished brick. They time the press over a few minutes, compare the count with the rated 7 strokes per minute and work out the output from 4 bricks per stroke.
Bricks from each mix are cured and then tested. Students check length, width and height with the Tape Measure, dry samples in the Drying Oven and weigh them before and after soaking to find water absorption. Crushing bricks on the Compression Testing Machine then shows how the mix and the pressing affect strength.
Frequently Asked Questions
How many bricks does it make in an hour?
The rated output is 1680 bricks per hour. That comes from 4 bricks per stroke at 420 strokes per hour, or 7 strokes a minute. Actual output depends on how steadily the mixing, the pallets and the curing area keep up with the press.
What size are the bricks?
Each brick is 230 x 110 x 75 mm with a frog, the shallow recess pressed into one face that takes mortar when the brick is laid. Four bricks are formed side by side on each 600 x 300 x 25 mm PVC pallet.
What power does the machine need?
The total power required is 31.5 HP. The pan mixer alone has a 7.5 HP, 1480 rpm three-phase motor. The site therefore needs a three-phase connection sized for the full load.
What does the pan mixer do?
It blends the raw materials with water before pressing, so every brick in a batch gets the same mix. Its side wall is 500 mm high, with a 10 mm bottom plate and 5 mm side wall plates, and it has its own 7.5 HP motor.
Why are the bricks pressed hydraulically?
A hydraulic press applies the same high force on every stroke, here up to 100 ton. Each brick is therefore compacted to a similar density, which keeps its size and weight close to those of the rest of the batch.
Other Equipment for Concrete and Brick Work
- Laboratory Concrete Mixer (tilting vessel for trial mixes)
- Saw (masonry bench saw for cutting bricks and blocks)
- Site Dumper (articulated dumper for moving materials)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
