Cutting Aviation Snips Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-12996
Jlab Export is a leading Cutting Aviation Snips Manufacturer,and suppliers in India
Left-cut aviation snips follow curves that turn to the left, anticlockwise as you look down on the work, and they cut straight lines too. This pair has steel blades with a straight edge in a body of steel and forged steel. It is self-opening and cuts cold rolled steel up to 18 gauge or stainless steel up to 22 gauge.
Specifications
| Cutting style | Left cutting |
| Material | Steel and forged steel |
| Blade material | Steel |
| Blade edge | Straight |
| Cold rolled steel | Up to 18 gauge |
| Stainless steel | Up to 22 gauge |
| Action | Self-opening |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Sheet Metal Lab Work with Left-Cut Snips
A typical ITI job is folding a shallow tray from Aluminium Sheet. Students mark the blank and the corner notches with a Square and scriber, then cut the outline and the notches. Left-cut snips handle the corners and curves that turn anticlockwise.
Once the sides are folded up, burrs on the cut edges are removed with a flat file from the File set. Teachers can have students cut one S-shaped template with this pair and the right-cut Cutting Aviation Snips, changing snips where the curve changes direction.
Frequently Asked Questions
Why does the cut edge come out wavy or distorted?
The waste strip curls as it is cut, and a wide strip of waste pulls the sheet out of shape. Trim most of the waste off first, so only a narrow strip runs along the line. Hold the blades square to the sheet, because tilted blades chew the edge.
How do these differ from the Aviation Tin Snips?
Both pairs are left-cut, and both cut 18 gauge cold rolled steel and 22 gauge stainless steel. The Aviation Tin Snips have offset blades that keep the hand above the sheet. This pair has straight-edged steel blades in a steel and forged steel body.
Is 22 gauge stainless steel thinner than 18 gauge mild steel?
Yes. A higher gauge number means a thinner sheet. The snips take thinner stainless steel because it is harder than cold rolled mild steel and needs more force to cut.
How do I cut a corner notch?
Make two cuts that meet at the corner, each one from the edge inward. Stop before the blade tips close fully, so the cut does not run past the corner into the part you keep.
Should the pivot be oiled?
Yes. A drop of light oil on the pivot and spring after cleaning keeps the self-opening action free. Wipe the blades and store the snips in a dry drawer, away from tools that could nick the edges.
More Tools for Sheet Metal Work
- Aviation Snips
- Straight Metal Tin Snips
- Riveting Tool (rivet gun kit with nose pieces)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
