Deburring Tools Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-12900
Jlab Export is a leading Deburring Tools Manufacturer,and suppliers in India
A hand deburring tool shaves off the sharp burr left on metal after drilling, cutting or filing. This 3-piece kit has a handle fitted with an HSS blade and two spare HSS blades. It deals with cross holes, deep holes, straight edges and curved edges, and it can also clear the inside edge of a cut tube.
Specifications
| Use | Cross holes, deep holes, straight and curved edges |
| Blades | HSS |
| Pieces | 3 |
| Kit contents | Handle with blade (1), deburring blades (2) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Fitting Shop Exercises for Students
In a fitting or sheet metal practical, students drill a plate and file it to size with Engineers Flat Files. They then run the blade along every edge and round each hole. Teachers check the job by drawing a cloth along the edges. A burr snags the cloth, while a finished edge lets it slide.
In refrigeration work the same tool clears the inside lip of tube cut with the mini Tube Cutter. Students compare its finish with that of the inner and outer Reamer on the same size of tube.
Frequently Asked Questions
What kinds of burr can it remove?
Burrs on cross holes, deep holes, straight edges and curved edges. Typical jobs are drilled holes in plate and tube, sawn or sheared edges, and the inner lip of a tube after cutting.
What are the blades made of, and can they be changed?
The blades are HSS (high speed steel). The kit holds the handle with one blade fitted and two spare blades, so a blunt or chipped blade can be swapped for a fresh one.
How is the tool used?
Rest the blade on the edge and draw it along in one steady stroke, letting it shave off a thin curl. Light pressure is enough. Pressing hard makes the blade dig in and leaves an uneven chamfer.
Should I use this or the Reamer on copper tube?
For tube ends the Reamer is quicker, because it works on the inside and outside together. This tool is the one to use where a reamer cannot reach, such as holes and edges on plate, brackets and fittings.
Other Edge Finishing Tools
- Abrasive Strip (Sand Paper)
- Flat File (bastard cut)
- Copper Fitting Brush
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
