Tube Cutter Manufacturer,Supplier and Exporter in India
Product Code : EL-AELE-12895
Jlab Export is a leading Tube Cutter Manufacturer,and suppliers in India
This mini tube cutter is small enough to turn in the gap behind a compressor or along a wall. It handles copper tube from 3 mm to 16 mm outside diameter. Its body is aluminium. It is meant for the small soft copper lines in refrigerators, freezers and room air conditioners, where a full-size cutter cannot swing round the pipe.
Specifications
| Type | Mini tube cutter |
| Body | Aluminium |
| Cuts | Copper tube |
| Cutting range | 3–16 mm outside diameter |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice on Small Copper Tube
Refrigeration students cut short lengths from a roll of 6 mm and 8 mm Copper Pipe, ream the ends and braze them into a small closed loop. The loop is pressurised with dry nitrogen through the Nitrogen Pressure Test Kit, and every joint is wetted with Bubble Solution For Leak Detection to find leaks. A badly cut end shows up here, because a crushed or oval tube rarely makes a sound joint.
Teachers can also set a timed task of cuts at marked lengths, checked afterwards for squareness and length. Short tubes cut with a heavy feed often come out oval, which shows the class why the feed must stay light.
Frequently Asked Questions
Why use a mini cutter rather than a full-size one?
The short body can be turned right round a tube with very little clearance, such as a line close to a wall or inside a cabinet. It covers copper from 3 mm to 16 mm OD. Larger pipe goes to the heavy-duty Tube Cutter.
Can it cut aluminium, steel or plastic tube?
This cutter is specified for copper tube only. For aluminium, thin stainless steel or PVC, use the heavy-duty Tube Cutter, which is made for all four materials.
Will it take inch-size refrigeration tube?
Yes. Tube of 1/4, 5/16, 3/8 and 1/2 in OD is well inside its 3 to 16 mm range. A 5/8 in tube, about 15.9 mm across, just fits. Anything larger needs the heavy-duty cutter.
Will it cut capillary tube?
Not well. A wheel pressed into capillary tube tends to close its tiny bore. The Capillary Tube Cutter is made to cut capillary tube without collapsing the inside diameter, so use that for metering lines.
Other Cutters and Tube End Tools
- Capillary Tube Cutter
- Reamer (inner and outer, for tubing)
- Copper Pipe Cutter
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
