• +91-85699-09696

Digital Conductivity Meter Manufacturer,Supplier and Exporter in India

Digital Conductivity Meter

Product Code : EL-CM-2195
Jlab Export is a leading Digital Conductivity Meter Manufacturer,and suppliers in India

A plain mains-powered meter for conductivity alone, this model reads from 0–200 µS/cm up to 0–1000 mS/cm on a 3½ digit LED display. The cell constant is shown on the display and set from the front panel, and a Check facility calibrates the instrument. It uses a platinum dip-type cell.

Specifications

MeasuresConductivity
Display3½ digit LED
Ranges0–200 µS/cm, 0–2, 0–20, 0–200 and 0–1000 mS/cm
Resolution0.1 µS/cm
Accuracy±1% FS ±1 digit
Temperature compensationManual, 0–50 °C
Cell constantAdjustable on the digital display, Check facility for calibration
Measuring cellPlatinum dip type
Power and size230 V ±10% AC, 50 Hz (100–260 V AC on request), 76 x 275 x 175 mm
Supplied withConductivity/TDS/salinity cell, operation manual, dust cover with table models
Minimum order quantity1 unit
Dispatch timeUsually 7–10 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Classroom Experiments with a Bench Conductivity Meter

Manual temperature compensation turns each reading into a short lesson on temperature. Students note the sample temperature with a Laboratory Thermometer, set it on the meter and only then read conductivity. They then compare Distilled Water, tap water and a solution of Potassium Chloride, each in one of the Tall Form Beakers, Borosilicate Glass, Economy. Dissolved ions carry the current, so pure water barely conducts.

The meter also separates strong and weak electrolytes. At similar dilutions, a KCl solution conducts far more than dilute acetic acid, because acetic acid ionises only in part. Students can then dilute a salt solution step by step and plot conductivity against concentration.

Frequently Asked Questions

What does an accuracy of ±1% FS ±1 digit mean in practice?
The possible error is 1% of the full scale of the range in use, plus one count on the last digit. So a reading in the upper part of a range carries a smaller relative error than a reading near the bottom of the same range.

How do µS/cm and mS/cm relate on this meter?
One mS/cm equals 1000 µS/cm. The lowest range reads 0 to 200 µS/cm with 0.1 µS/cm resolution, which suits distilled, RO and drinking water. The mS/cm ranges, up to 1000 mS/cm, cover salty and process samples.

Can the meter run on a mains supply other than 230 V?
The standard model runs on 230 V ±10% AC at 50 Hz. Meters for 100–260 V AC are made on request, so mention your mains voltage in your enquiry.

Why does my reading for distilled water creep upward?
Distilled water takes up carbon dioxide from the air, which forms ions and raises its conductivity within minutes. Measure it straight after pouring, keep the beaker covered and rinse the cell with the same water before you take the reading.

Other Conductivity Models to Compare

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 20 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us