Digital L.C.R. METER Manufacturer,Supplier and Exporter in India
Product Code : EL-DMI-1045
Jlab Export is a leading Digital L.C.R. METER Manufacturer,and suppliers in India
Digital L.C.R. METER (code EL-DMI-1045) is a bench-type digital LCR meter that measures capacitance up to 10,000 microfarad, resistance up to 20 megohm and inductance up to 2,000 henry, with dissipation (D) and quality (Q) factor also read directly on its 4-digit LED display. It is used in electronics and physics labs for checking components. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Capacitance | 0–10,000 µF |
| Resistance | Up to 20 MΩ |
| Inductance | Up to 2,000 H |
| D and Q values | Directly readable |
| Display | 4-digit LED |
| Construction | Bench type |
| Power supply | 220 V, 50 Hz mains |
| Quality check | Each meter is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-DMI-1045 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab LCR Instruments?
| Model | Ranges as listed | Type and other details |
|---|---|---|
| This meter (EL-DMI-1045) | C 0–10,000 µF; R up to 20 MΩ; L up to 2,000 H | Bench digital meter; 4-digit LED; D and Q read directly |
| Hand held L.C.D. | L 1 mH–100 H; C 1 pF–100 mF; R 0.1 Ω–20 MΩ | Hand-held instrument with LCD display |
| L.C.R. Bridge | R 0.01 Ω–1 MΩ; C 2 pF–110 µF; L 2 µH–110 H | Solid-state bridge; mains or battery; accuracy ±1% |
Choose this bench meter for direct digital readings with D and Q and a high inductance range; the hand-held model suits portable checks, and the bridge suits teaching the balancing method.
What Is the Digital LCR Meter Used For?
A digital LCR meter applies a small AC test signal to a component and works out its inductance (L), capacitance (C) or resistance (R) from the resulting voltage and current. The D factor shows how lossy a capacitor is and the Q factor how efficient an inductor is; Q is the reciprocal of D. In B.Sc. electronics, polytechnic and engineering labs, and in ITI electronics workshops, students use it to verify the values of resistors, capacitors and coils before building circuits, to sort unmarked components and to study how winding and core affect a coil. Measure components out of circuit, and discharge capacitors fully before connecting them to the meter.
What to Specify When Ordering
- Mains supply — the meter is listed for 220 V, 50 Hz; state your local supply.
- Test leads or fixtures — the listing does not mention them, so say what you need in the enquiry.
- Quantity — the minimum order is 10 units; add a Q meter or LCR bridge if the lab also teaches those methods.
Frequently Asked Questions
What do the D and Q readings mean?
D, the dissipation factor, describes the losses in a capacitor; Q, the quality factor, describes how close an inductor is to an ideal, loss-free coil. A low D and a high Q indicate a better component.
How is it different from the L.C.R. Bridge?
This meter gives a direct digital reading on a 4-digit LED display. The bridge, as listed, is balanced over seven ranges and works on mains or a battery, with a lower top capacitance and inductance range.
Who manufactures this LCR meter?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, makes it at its works in Ambala, Haryana, India, and quotes for it directly.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, an electronic lab instruments manufacturer in India, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The LCR meter is made at JLab’s own works rather than bought from a trader, so institutions, dealers and importers order factory-direct. JLab exports worldwide and ships to buyers in every region — for example DR Congo in Central Africa, Mali in West Africa, Georgia in Eastern Europe, Croatia in Southern Europe and Kyrgyzstan in Central Asia. Tender buyers can see the JLab lab tenders page.
Related Component Testing Instruments
- Hand held L.C.D. — portable LCR measurement with an LCD display.
- L.C.R. Bridge — bridge method for resistance, capacitance and inductance.
- Q Meter — measures the quality factor of an inductor at 1 kHz or 10 kHz.
- Digital Capacitance Meter Type — capacitance only, from 1 pF to 10,000 microfarads.
See the Digital Measuring Instruments range or the full Scientific Instrument section.
Request a Quote
Quotes come direct from the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), your mains supply, any leads or fixtures you need and the delivery location through the contact page.
Last updated: 9 October 2026
