Electrical and Electronics Trainer Kit Manufacturer,Supplier and Exporter in India
Product Code : EL-PET-10183
Jlab Export is a leading Electrical and Electronics Trainer Kit Manufacturer,and suppliers in India
Electrical and Electronics Trainer Kit (code EL-PET-10183) is a trainer for digital and analog circuit practicals. Its board carries a 1660 tie-point breadboard, a sine, square and triangular generator rated 200 kHz, four DC volt/current panel meters and 16 logic level switches with LED indicators, all powered from built-in fixed, variable and AC supplies. Jain Laboratory Instruments Pvt Ltd (JLab) produces the kit in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Logic level inputs | 16 switches, TTL/CMOS levels |
| Output indicators | 16 LEDs |
| Logic test tools | Dual logic pulser; logic probe |
| Displays | Two BCD seven-segment displays |
| Breadboard | 1660 tie points, on board |
| Potentiometers | 6 |
| Signal generator | Sine, square and triangular, 200 kHz |
| Clock | Fixed clock generation |
| Digital panel meters (DPM) | Four, with mode selection for DC voltage or DC current |
| Fixed DC supplies | +5 V; ±15 V |
| Variable DC supplies | 0 to +30 V; 0 to −30 V |
| AC supply | 0-10-15-20-30 V |
| Quality check | Each kit is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-PET-10183 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with the Basic Electronics Trainer Kit?
| Model | Seven-segment displays | Potentiometers | Fixed DC | Variable DC | AC supply |
|---|---|---|---|---|---|
| This kit (EL-PET-10183) | Two, BCD | 6 | +5 V; ±15 V | 0 to +30 V; 0 to −30 V | 0-10-15-20-30 V |
| Basic Electronics Trainer Kit | Two, hex | 2 | +5 V; ±12 V | 0 to +15 V; 0 to −15 V; 0 to 30 V | 15 V-0-15 V |
The logic section, breadboard, generator and panel meters have the same specification on both kits. Pick this one when the course calls for the larger split variable rails, the multi-tap AC supply or more potentiometers; pick the Basic Electronics Trainer Kit when hexadecimal displays matter more.
What Is the Electrical and Electronics Trainer Kit Used For?
With split variable DC rails and a multi-tap AC supply, the kit can power the low-voltage logic circuits on its breadboard as well as analog circuits — rectifiers, regulators and amplifiers — that need higher or symmetrical supplies, while the panel meters read their DC voltages and currents.
Frequently Asked Questions
Why does the AC supply have several taps?
Each tap gives a different AC voltage from the same supply, so a rectifier or other AC circuit can be tried at more than one input voltage without extra equipment.
What does a BCD seven-segment display show?
The decimal digit 0 to 9 for a binary-coded decimal input, which makes counter and decoder outputs readable at a glance.
What should an export enquiry include?
The quantity, the destination country and port or city, delivery terms such as FOB or CIF, and any tender reference.
Who manufactures the kit?
Jain Laboratory Instruments Pvt Ltd, trading as JLab, at its works in Ambala, Haryana, India.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, a manufacturer of electronics trainers and laboratory equipment in India, incorporated in 2017 and located on Hargolal Road, Ambala, Haryana. The kit is produced at JLab’s own works, not bought from a trader, and goes factory-direct to schools, colleges, dealers and importers, with repeat orders handled by the same manufacturer. JLab exports worldwide and ships to buyers in every region — for example Papua New Guinea in Oceania, Zambia in East Africa, South Africa in Southern Africa, Germany in Western Europe and Hong Kong in East Asia. Tender buyers will find details on the JLab lab tenders page.
Related Electronics Trainers
- Characteristics of Semiconductor — silicon, germanium and Zener diodes, an LED and a DIAC on one board with variable DC supplies.
- Analog Component Trainer Kit — resistor, capacitor and inductor banks, transistors and a 12 V SPDT relay.
- Digital Trainer Kit — an 1880 tie-point breadboard and four BCD seven-segment displays.
Browse the Power Electronics Trainers category or all Electronics Lab Equipments.
Request a Quote
Ask for a quotation with the Add To Cart button on this page or through the contact page, stating the number of kits and the delivery city and country.
Last updated: 22 October 2026
