Pedestal Eye And Face Wash Manufacturer,Supplier and Exporter in India
Product Code : EL-MWLE-13088
Jlab Export is a leading Pedestal Eye And Face Wash Manufacturer,and suppliers in India
A pedestal eye and face wash is a fixed station that sends a soft spray of water up to rinse chemicals or dust from the eyes and face. This unit stands on a cast iron base plate and has a 300 mm plastic bowl with ABS spray heads. It opens with either a push handle or a foot pedal.
Specifications
| Operation | Hand push handle and foot pedal |
| Bowl | 300 mm diameter, plastic |
| Spray heads | ABS plastic eye and face wash heads with flip-off dust covers |
| Valve | Chrome-plated brass stay ball valve with inline strainer |
| Pedestal | Powder-coated steel with cast iron base plate |
| Waste | Integral waste fitting |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Safety Drills for Students and Staff
Chemistry and workshop labs can run a short eye wash drill at the start of each term. Students walk from their bench to the unit and open it with the handle or the pedal. They bring their face down to the spray and hold their eyelids open with their fingers. The teacher times the walk with a Digital Stopwatch and checks that the route stays clear.
The weekly check is just as simple. Lab staff lift the dust covers and run the water for a short while to flush the pipe and strainer. They note the date on a card beside the Laboratory Safety Chart. Students can also compare the station with the portable Eye Wash Bottle, which goes where there is no water supply.
Frequently Asked Questions
How is the eye and face wash operated?
Push the handle or press the foot pedal. Either one opens the ball valve and sends water through the spray heads. Using the pedal leaves both hands free to hold the eyelids open.
How often should the unit be flushed?
Many labs run it once a week for a short time. This clears standing water from the pipe and shows that the heads spray, the strainer is clear and the bowl drains. Keep a dated record of each check.
What does the unit need for installation?
It needs a clean water supply connected to the valve and a drain line connected to the integral waste fitting. The pedestal stands on its cast iron base plate, so it can sit on open floor near the benches.
What are the dust covers for?
The flip-off covers keep dust and debris out of the spray heads between uses. During each weekly flush, check that the covers open freely and that the heads are not blocked.
Where should the station be placed?
Close to where chemicals, dusts or grinding work are handled, on a clear route with no doors or steps in the way. Mark the spot with a sign so visitors and new students can find it quickly.
Other Lab Safety Equipment
- Emergency Eye Washer (stainless steel, with shower)
- Safety Goggles
- First Aid Kit (wall-mounted box)
- Fire Extinguisher (dry chemical)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 5 November 2026
