Torx Set Manufacturer,Supplier and Exporter in India
Product Code : EL-WT-12964
Jlab Export is a leading Torx Set Manufacturer,and suppliers in India
Screws with a six-lobe (star) recess are common on cars, appliances and electronic equipment. The rounded lobes take a high turning force with little risk of the tool riding out. This set has seven six-lobe (star) drive tools in sizes T8, T10, T15, T20, T25, T27 and T30.
Specifications
| Drive type | Six-lobe (star) |
| Sizes | T8, T10, T15, T20, T25, T27, T30 |
| Pieces | 7 |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 4–6 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Workshop Practice with Star Drive Screws
In electronics and appliance servicing classes, a first task is to identify screw drives. Students sort a tray of mixed screws into slotted, cross-head, hex socket and six-lobe types. They pick the right tool for each from this set, the Hex Key Set and the Screwdrivers. A hex key pushed into a star recess soon slips, and they see why.
In an automobile workshop, star screws hold many trim panels, lamp units and small covers. Trainees remove and refit them on a training vehicle or a stripped-down unit, choosing the size by fit and keeping the tool square to the screw head.
Frequently Asked Questions
What does the T number mean?
It is a size code for the star recess, and it rises with the screw size, from T8 for small electronic screws to T30 in this set. Use the exact number: neighbouring sizes look alike, but a smaller tip turns loose and damages the lobes.
Why do star screws strip less than cross-head screws?
The lobes push on the tool with near-upright faces, so the tip is not forced up and out of the recess as a cross-head driver is. Less end pressure is needed, and the recess lasts longer when the right size is used.
Which sizes are used most often?
In servicing work T10 to T25 turn up most often, on appliance, computer and vehicle trim screws. T8 suits fine electronic screws, and T27 and T30 fit heavier parts.
How do I avoid damaging the lobes?
Clean the recess, push the tip fully home and keep the tool in line with the screw. On a tight screw apply steady force rather than jerks, and stop at once if the tool starts to turn inside the recess.
Other Tools for Screws and Bolts
- Screwdriver (magnetic, fully insulated, anti-slip grip)
- Socket With Ratchet Handle Set (metric and inch sockets)
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
