A.F. Oscillator Digital Manufacturer,Supplier and Exporter in India
Product Code : EL-TAMI-1024
Jlab Export is a leading A.F. Oscillator Digital Manufacturer,and suppliers in India
A.F. Oscillator Digital (code EL-TAMI-1024) is an audio-frequency signal generator with a digital readout that produces sine, square and triangular waves from 1 Hz to 250 kHz in five selectable bands. Its output is 1 to 10 V peak-to-peak, set in three coarse steps with a fine control, from a 50 ohm output, for electronics and physics practicals. It is made by Jain Laboratory Instruments Pvt Ltd (JLab) at its works in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Frequency range | 1 Hz to 250 kHz in five selectable bands |
| Waveforms | Sine, square and triangular |
| Amplitude | 1 to 10 V peak-to-peak, continuously variable in three coarse steps with a fine control |
| Output impedance | 50 ohm |
| Readout | Digital |
| Dimensions | 13 x 6 x 5 in (about 33 x 15 x 13 cm) |
| Quality check | Each oscillator is visually inspected before dispatch |
| Pack quantity | Each (sold individually) |
| Minimum order quantity | 10 units |
| Dispatch time | Usually 7–10 working days |
| Product code | EL-TAMI-1024 |
| Manufacturer | Jain Laboratory Instruments Pvt Ltd (JLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
How Does It Compare with Other JLab A.F. Oscillators?
| Model | Frequency range | Waveforms | Output | Output impedance | Other listed features |
|---|---|---|---|---|---|
| This oscillator (EL-TAMI-1024) | 1 Hz to 250 kHz, five bands | Sine, square, triangular | 1 to 10 V p-p, three coarse steps and fine control | 50 ohm | Digital readout |
| A.F. Oscillator Function Generator Cum Digital | 1 Hz to 1 MHz, five decade ranges | Sine, square | 1 mV to 20 V open circuit, six steps, continuously variable | 600 ohm | Digital readout; built-in frequency meter, 10 Hz to 10 MHz |
| A.F. Oscillator Bridge Experiments | 1 Hz to 250 kHz, 6 steps | Sine, square, triangular | 0 to 10 V, coarse and fine controls | Not listed | Listed as the AC source for bridge experiments; accuracy ±3% or 2 Hz |
Choose this model when you want all three waveforms with a low 50 ohm source and a digital readout. The function generator cum frequency meter suits buyers who need 1 MHz coverage, millivolt signals and a frequency meter for other circuits, and the bridge-experiments oscillator is listed specifically as a signal source for AC bridge practicals.
What Is the A.F. Oscillator Digital Used For?
A function generator with sine, square and triangular outputs covers most signal-source needs of an electronics bench. The sine wave drives amplifier and filter frequency-response measurements, LCR resonance and AC bridge experiments; the square wave shows RC charging curves and how an amplifier handles fast edges; and the triangular wave is useful for op-amp integrator and differentiator circuits, comparator and Schmitt-trigger switching, and checking linearity on an oscilloscope. The digital readout makes each setting easy to read and record. It suits B.Sc. physics and electronics practicals, engineering and polytechnic labs, and ITI electronics workshops.
A 50 ohm output impedance means the amplitude changes less when the load changes than it would from a high-impedance source, and it matches 50 ohm coaxial leads. Start at the lowest amplitude when connecting a new circuit, then raise it with the coarse steps and fine control while watching the output on an oscilloscope.
What to Specify When Ordering
- Model — this three-waveform oscillator, the 1 MHz function generator with frequency meter, or the bridge-experiments oscillator.
- Mains supply and leads — the listing does not state the supply; give your local supply and the output leads you need.
- Quantity — the minimum order is 10 units; many labs order one per bench along with an oscilloscope.
Frequently Asked Questions
What waveforms and frequencies does it provide?
Sine, square and triangular waves from 1 Hz to 250 kHz, selected in five bands.
What is the output amplitude and impedance?
The amplitude is 1 to 10 V peak-to-peak, adjusted in three coarse steps with a fine control for continuous setting. The output impedance is 50 ohm.
How does it differ from the A.F. Oscillator Function Generator Cum Digital?
That model reaches 1 MHz, gives sine and square waves from a 600 ohm output down to 1 mV and includes a frequency meter for external signals. This one adds a triangular wave and has a 50 ohm output, with a 250 kHz upper limit.
How is it different from the A.F. Oscillator Bridge Experiments?
Both cover 1 Hz to 250 kHz with sine, square and triangular waves. The bridge-experiments unit is listed as a source for AC bridge practicals with a 0 to 10 V output; this one is listed with a 50 ohm output and a digital readout.
What does JLab need to prepare an export quotation?
The quantity, destination country and port or city, delivery terms such as FOB or CIF, your mains supply, any packing or labelling requirements and a tender reference if applicable.
Who manufactures the A.F. Oscillator Digital?
Jain Laboratory Instruments Pvt Ltd (JLab) builds it at its works in Ambala, Haryana, and supplies it directly as the manufacturer.
OEM Manufacturer
JLab is the trading name of Jain Laboratory Instruments Pvt Ltd, an Indian manufacturer of electronics lab instruments and physics apparatus, incorporated in 2017 and based on Hargolal Road, Ambala, Haryana. The oscillator is made in JLab’s own works, not bought in from a trader, so colleges, institutes, dealers and importers order factory-direct, each unit is visually inspected before it ships, and repeat orders are handled by the maker. JLab holds MSME Udyam registration UDYAM-HR-01-0003849 (manufacturing enterprise) and Importer-Exporter Code 3317504552. JLab exports worldwide and ships to buyers in every region — for example Ecuador in South America, Senegal in West Africa, Lesotho in Southern Africa, Honduras in Central America and the Caribbean and Albania in Southern Europe. Tender buyers can see the JLab lab tenders page.
Instruments to Use with It
- Dual Trace Oscilloscope — to view the generator output and the circuit response side by side.
- A.C. Milli Voltmeter Type — for reading AC signal levels in frequency-response work.
- Digital Frequency Meter Type — a bench frequency meter for checking signal frequencies.
- Power Output Meter — measures amplifier output power across a selectable load.
- A.F. Oscillator Bridge Experiments — the oscillator listed for AC bridge practicals.
See the full Test and Measuring Instruments range or all Scientific Instrument products.
Request a Quote
JLab quotes directly as the manufacturer. Use the Add To Cart enquiry button on this page, or send the quantity (minimum 10 units), the model you prefer, your mains supply and the delivery location through the contact page.
Last updated: 9 October 2026
