CNC Milling Machine with Cabinet and PC Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-9075
Jlab Export is a leading CNC Milling Machine with Cabinet and PC Manufacturer,and suppliers in India
This CNC milling machine comes as a complete workstation for a training room. The three-axis mill sits above a cabinet that stores its PC, controller and electrical wiring, and a coolant system with a removable collector is fitted. The table travels 300 mm in X, 146 mm in Y and 153 mm in Z, and the spindle runs from 1100 to 11000 rpm.
Specifications
| Travel (X / Y / Z) | 300 / 146 / 153 mm |
| Spindle speed | 1100–11000 rpm |
| Stepping resolution | 0.003 mm |
| Mechanical repeatability | 0.01 mm |
| Rapid travel | 30 in/min |
| Lead screws | 1/2 in (12.7 mm), 20 pitch, Cr-Mo, with adjustable split bronze nuts on all axes |
| Slides and table | Ground steel ways with adjustable brass gibs (tapered gib on X), hard-anodised aluminium table |
| Program input | Standard G-code import |
| Coolant | Coolant system with removable collector |
| Cabinet and PC | Lower cabinet for the PC, controller and wiring, PC with 2.4 GHz processor, 512 MB RAM, 52X DVD writer, 15 in TFT monitor, keyboard and optical mouse |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
CNC Milling Exercises for Students
A first exercise is a short part program typed on the supplied PC. Students use G00 for rapid moves, G01 for straight cuts and G02 or G03 for arcs to mill a slot and a round-cornered pocket in aluminium or plastic. They set the work offset at one corner of the stock and a length offset for each cutter. A dry run with the cutter raised clear of the work comes before the first cut.
After machining, students measure slot width and pocket depth with a Vernier Caliper 0-300 mm and check a faced thickness with an External Micrometer. Before the next job, a Dial Gauge run along the clamped stock shows whether its edge lies parallel to the X travel. Teachers can then change the feed and spindle speed in the same program and let the class compare surface finish, with coolant on and off.
Frequently Asked Questions
What is stored in the cabinet?
The cabinet under the mill holds the PC, the controller and the electrical wiring, which keeps cables off the bench. The PC has a 2.4 GHz processor, 512 MB RAM, a 52X DVD writer, a 15 in TFT monitor, a keyboard and an optical mouse.
Which programs can the mill run?
It imports standard G-code. Students can write a program by hand or bring in G-code from CAM software. G00 moves rapidly, G01 cuts in a straight line and G02 or G03 cuts an arc, while M-codes switch the spindle and coolant on and off.
What do the 0.003 mm and 0.01 mm figures mean?
The stepping resolution of 0.003 mm is the smallest move an axis makes on one step. The mechanical repeatability of 0.01 mm is how closely a slide returns to the same point. Finished sizes also depend on the cutter, the clamping and how the part is measured.
Why does a training mill need coolant?
Coolant carries heat and chips away from the cutter when cutting metal, which helps tool life and surface finish. On this machine the fluid drains to a removable collector, so it can be emptied and cleaned after a class.
Other CNC Machines for the Training Room
- CNC Micro Mill (bench mill with the same X, Y and Z travels)
- CNC Milling Machine Table Model
- CNC Lathe Machine with Cabinet and PC
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
