• +91-85699-09696

CNC Retrofit Kit for Conventional Universal Milling Machine Manufacturer,Supplier and Exporter in India

CNC Retrofit Kit for Conventional Universal Milling Machine

Product Code : EL-CTM-9029
Jlab Export is a leading CNC Retrofit Kit for Conventional Universal Milling Machine Manufacturer,and suppliers in India

A college or workshop that already owns a conventional universal milling machine can use this retrofit kit to bring it under CNC control. The conversion keeps the column, knee and table of the existing machine in service, while the axes are moved by a program instead of by handwheel.

Specifications

Kit typeCNC retrofit
For use onConventional universal milling machines
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Lab Work Before and After the Retrofit

A retrofit gives students two lessons on one type of machine. On a manual machine such as the Universal Milling Machine, they first cut a slot or a step by handwheel. They note the time taken and the sizes reached. After conversion, they write the same job in G-code, run it in simulation and then cut it under program control.

Setting up the converted machine is a practical in itself. Backlash in each feed screw is checked with a Dial Gauge held against the table, and each axis is jogged slowly through its travel before the first cut. Parts milled before and after the retrofit are measured with a Vernier Caliper, so the class can compare the two methods.

Frequently Asked Questions

What does a CNC retrofit change on the machine?
It replaces handwheel feeding with programmed motion. The machine then follows G-code moves such as G00 rapids, G01 straight cuts and G02 or G03 arcs, while its structure and spindle stay in use.

Why retrofit a universal mill instead of buying a new CNC mill?
A college that owns a sound universal milling machine can reuse its heavy structure and table. The retrofit also lets students compare manual and CNC operation on the same kind of machine, which a new CNC mill alone cannot show.

What should be checked on the machine before a retrofit?
The slides, gibs and feed screws should be in good condition, because wear and backlash carry straight over into CNC moves. Measure the backlash on each axis with a dial gauge and adjust the gibs before conversion starts.

What is a universal milling machine?
It is a knee-type horizontal milling machine whose table can also be swivelled. The swivel lets it cut helical grooves with a dividing head, which is why toolrooms and training workshops have long kept one.

Other Retrofit and CNC Milling Equipment

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 6 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us