CNC Milling Controller Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-9035
Jlab Export is a leading CNC Milling Controller Manufacturer,and suppliers in India
Six axes of motion, all able to move together in interpolation, set this milling controller apart from a basic three-axis unit. It drives up to six stepper or servo motors plus an independent servo spindle and has 56 inputs and 48 outputs. Programs are stored on a 256M built-in electronic disk that can be expanded to 8G.
Specifications
| Axes | 6 axis movement, 6 axis interpolation linkage |
| Motor control | 6 stepper or servo motors, independent servo spindle |
| Speed control | Speed look-ahead processing for smooth speed transitions |
| Tool magazines | Straight-line, disc and cylinder magazines, customisable tool change |
| Inputs / outputs | 56 / 48 |
| Analog and PWM | 2-channel 0–10 V analog output, one PWM control port |
| Pulse frequency | Up to 1M |
| Storage | 256M built-in electronic disk, expandable to 8G |
| Communication | USB, Ethernet, serial, U disk and SD card |
| Program tools | MPG running of G-code, track preview, real-time tracking, syntax check, self-diagnosis, parameter backup and recovery |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Lab Exercises with the Milling Controller
In a CNC lab, students load a milling program from a U disk, run the syntax check and watch the G-code track preview before any axis moves. Running the program from the manual pulse generator then lets them step through the cuts at their own pace. Turning the handwheel faster or slower shows exactly how each block drives the axes.
Wiring practicals make use of the large input and output count. Students connect limit switches and an emergency stop to the inputs, then check each output and the 0–10 V spindle signal with a Digital Multimeter. The pulse train sent to each drive can be viewed on a Digital Storage Oscilloscope Dual Channel. Advanced groups can run one program on a stepper axis and on a servo axis and compare the two.
Where This Controller Type Is Used
Outside the classroom, the same controller runs metal parts machining and the processing of glass panels for phones, televisions, computers and switches. It also suits wood carving for furniture and handicrafts, and flexible lines that mill, grind and polish in sequence.
Frequently Asked Questions
Can it run a four- or five-axis machine?
Yes. It controls up to six axes and links all six in interpolation, so a three-axis mill can later gain a rotary axis without a new controller. Each added axis needs its own stepper or servo motor and drive.
Does it work with stepper or servo motors?
Both. It can control six stepper or servo motors, and the spindle has its own independent servo control. The choice depends on the machine, with servos used where higher speed and position feedback are wanted.
What does speed look-ahead processing do?
The controller reads ahead in the program and plans the feed so that speed changes between moves are smooth. This avoids a sudden stop at every block when the cutter follows a curve made of many short lines.
How are programs loaded and saved?
Programs come in by USB, Ethernet, serial link, U disk or SD card. They are stored on the built-in electronic disk, and the machine parameters can be backed up and recovered if a setting is lost.
Which tool changers does it support?
It supports straight-line, disc and cylinder tool magazines. The tool change features can be customised to suit the machine the controller is fitted to.
Other CNC Controllers and Kits
- CNC Lathe Controller
- CNC Retrofitting Kit for Milling Machine
- CNC Retrofit Kit for Conventional Universal Milling Machine
- PLC and HMI Training Kit
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
