• +91-85699-09696

CNC Training Lathe, Big-Bore Spindle Manufacturer,Supplier and Exporter in India

CNC Training Lathe, Big-Bore Spindle

Product Code : EL-CTM-9050
Jlab Export is a leading CNC Training Lathe, Big-Bore Spindle Manufacturer,and suppliers in India

This CNC turning centre is built for medium-diameter work that calls for high spindle torque. Its big-bore spindle lets larger bar stock pass through the headstock, and an 8-station bi-directional turret turns the shorter way to the next tool. Both axes run on linear motion guideways with AC digital servo drives, and the spindle has an AC digital drive.

Specifications

Machine typeCNC turning centre, X and Z axes
SpindleBig-bore spindle, AC digital spindle drive
Axis drivesAC digital servo drive on both axes
GuidewaysLinear motion guideways on X and Z
Turret8-station, bi-directional
Tool holders supplied3 boring bar holders, 1 axial tool holder
LubricationCentralised and programmable, with lube oil collector
CoolantCoolant system
Electrical panelAir-conditioned, with controlled temperature and humidity and dust-free electronics
OptionsHydraulic tailstock with rotating centre, hydraulic collet chuck, bar feeder with bar puller, part catcher, probe for automatic tool setting, servo turret with live tools, rear or side chip conveyor, auto door, reduction sleeves
Minimum order quantity1 unit
Dispatch timeUsually 14–18 working days
ManufacturerJLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India

Workshop Practice on the Turning Centre

Bar work shows students what the big-bore spindle is for. They feed a bar through the headstock, face and turn a short part, then part it off and draw the bar forward for the next one. In the program they call turret stations by number and set each tool offset by touching off on the work.

Internal work uses the standard holders. Students drill on the spindle axis from the axial holder, open the hole with a boring bar and check the bore with a Dial Caliper. Outside diameters are measured with an External Micrometer. Turning a similar part on a conventional Center Lathe Machine lets the class compare set-up and cycle times.

Frequently Asked Questions

What is a big-bore spindle used for?
A big bore lets larger bar stock pass right through the spindle. Long bars can then be fed out, turned and parted off one part at a time. With the bar feeder option the machine works through a bar without reloading by hand.

What does a bi-directional turret do?
It indexes in either direction and takes the shorter path to the next tool. On an 8-station turret this cuts the idle time between operations, which adds up over a batch of parts.

Can the machine use live tools?
Yes, as an option. A servo turret with live tools can drill cross holes or mill flats while the part is still in the chuck. The part then does not have to move to a milling machine.

Which tool holders come with the machine?
Three boring bar holders and one axial tool holder are standard. The machine can also be supplied fully tooled for the parts the buyer plans to run.

What does the part catcher option do?
A part catcher swings under the work as it is parted off and carries the finished piece out of the chip area. Parts are not lost in the chips, and the operator does not reach into the machine to collect them.

Other CNC Turning Machines

For a quote, use Add To Cart or send us a message through the contact page.

Last updated: 20 November 2026


   

Office Address

Works: 2475-84,
Hargolal Road,Ambala, Haryana

[email protected]

+91-85699-09696

Follow Us