CNC Semi Production Lathe Manufacturer,Supplier and Exporter in India
Product Code : EL-CTM-9045
Jlab Export is a leading CNC Semi Production Lathe Manufacturer,and suppliers in India
Colleges that want students on an industrial turning centre, and want light production from the same machine, can use this CNC lathe. It has a 150 mm hydraulic chuck, an 8-station automatic servo turret and a 5.1 kW AC servo spindle running from 100 to 6000 rpm. LM guides carry the axes under metallic bellows, and the machine is ready for a flexible manufacturing cell.
Specifications
| Bed | Flat or 45° slant |
| Chuck | 150 mm, hydraulic |
| Max turning diameter / length | 100 mm / 370 mm |
| Swing over bed / over cross slide | 300 mm / 125 mm |
| Centre height / distance between centres | 150 mm / 420 mm |
| Spindle | AC servo, 5.1 kW (7 HP), 100–6000 rpm with VFD |
| Axes | X travel 120 mm, Z travel 380 mm, servo motors with servo drives, LM guides under metallic bellows |
| Feed rate / rapid travel | 0–10,000 mm/min / 10,000 or 20,000 mm/min |
| Turret | Automatic servo turret, 8 stations, 20 x 20 mm tools, 16 mm boring bar |
| Tailstock | Hydraulic or manual, base stroke 230 mm, quill stroke 100 mm |
| Minimum order quantity | 1 unit |
| Dispatch time | Usually 14–18 working days |
| Manufacturer | JLab (Jain Laboratory Instruments Pvt Ltd), Ambala, India |
Turning Practicals for Students
Start with a stepped shaft. Students program the diameters with G00 and G01, add a radius with G02 or G03 and use a canned turning cycle for the roughing passes. Each turret station gets its tool offset by touching off on the face and the diameter, and the program is checked in simulation before the first cut.
Diameters are then measured with an External Micrometer and shoulder lengths with a Dial Caliper. A threading exercise follows, with the finished thread checked against a Thread Gauge. Because the lathe offers FMS compatibility, advanced groups can go on to the Flexible Manufacturing System and study how a cell controller runs a turning station.
Frequently Asked Questions
How far does the tailstock move?
Its base travels 230 mm along the bed and the quill extends 100 mm, so the centre can be brought up to shafts of different lengths. The tailstock is worked hydraulically or by hand.
Why does the tool leave a mark on its way back?
If the tool returns along Z without first moving off the diameter, it can rub the turned surface and leave a fine line or a skim cut. Program a small X move away from the work before the return, then come back in for the next pass. Students see the difference by turning one part each way.
How fine are the axis movements?
Axis resolution is 0.001 mm, positioning 0.010 mm and repeatability ±0.005 mm. The X and Z axes are moved by servo motors with servo drives, which hold position under cutting load.
What supply and floor area should we plan for?
It runs on a 415 V, three-phase, 50 Hz supply held within ±2%. The machine measures 2200 x 1200 x 1700 mm, and both lubrication and coolant are automatic.
How does the lathe work in an automated cell?
With FMS compatibility it can be linked to a cell controller, so a robot can load blanks and a signal can start the cycle instead of a button. A hydraulic chuck suits this, because it can clamp and release on a signal.
Other CNC Lathes and Turning Machines
- CNC Training Lathe, Big-Bore Spindle (turning centre with a big-bore spindle)
- CNC Lathe System
- CNC Lathe Machine
- CNC Semi Production Mill
For a quote, use Add To Cart or send us a message through the contact page.
Last updated: 6 November 2026
